Advanced Racing Dynamics
Thread Starter
12 Second Club
iTrader: (3)
Joined: Jan 2005
Posts: 381
Likes: 0
From: NW Houston, TX
Advanced Racing Dynamics Hey guys,
has anybody ever heard of this shop? A guy told me about this place and it is no more then 3 min away from my house. I drove by it and there are a bunch of LS1's over there. Its located on Hwy 6 and Addicks Satsuma. If anybody had any work done or knows about it, please post and let me know. Much easier when your performance shop is walking distance.
has anybody ever heard of this shop? A guy told me about this place and it is no more then 3 min away from my house. I drove by it and there are a bunch of LS1's over there. Its located on Hwy 6 and Addicks Satsuma. If anybody had any work done or knows about it, please post and let me know. Much easier when your performance shop is walking distance.
ARD Advanced Racing Dynamics Hey, 02Z28EVLMo4
ARD built my 99Z28. They do exllecent work. They did heads stage 3 heads and cam, TNT kit, Stage 3 ARD 4l60e, suspension, 12 bolt rear end, etc. My car runs low tens high nines and is very streetable. They also rebuilt my 2000 ford Power stroke 7.3, It had dropped a valve and cracked a sleeve. Owen rebuilt the short block and did head work to the 7.3 heads. My truck has never run this good. Since I have been going their they have built some very fast cars, give Jody or Owen a call: ARD 832-593-9140
Later JP
ARD built my 99Z28. They do exllecent work. They did heads stage 3 heads and cam, TNT kit, Stage 3 ARD 4l60e, suspension, 12 bolt rear end, etc. My car runs low tens high nines and is very streetable. They also rebuilt my 2000 ford Power stroke 7.3, It had dropped a valve and cracked a sleeve. Owen rebuilt the short block and did head work to the 7.3 heads. My truck has never run this good. Since I have been going their they have built some very fast cars, give Jody or Owen a call: ARD 832-593-9140
Later JP
ARD Built my stage III tranny and have not had anyproblems with it. They are currently in the process of building a 408 solid roller motor for me. 
. Prices are nice and they do stand behind their work. 
. Prices are nice and they do stand behind their work. Trending Topics
ive been to ARD several times...
they did my cam, gears, fuel pump, surfaced my heads, put in my lifters, springs, rods, and did a rebuild stage 3 on my tranny!
the cam has been in my car since last sept or so along with fuel pump and gears!
and ive had the tranny for a good 8-9 months no problems, and i spray also!
they are really good place!
ARD is along the lines with ICON, IMO
they did my cam, gears, fuel pump, surfaced my heads, put in my lifters, springs, rods, and did a rebuild stage 3 on my tranny!
the cam has been in my car since last sept or so along with fuel pump and gears!
and ive had the tranny for a good 8-9 months no problems, and i spray also!
they are really good place!
ARD is along the lines with ICON, IMO
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
