Parts For sale/Car for sale in DFW
07-21-2005 | 11:45 AM
#22
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by 1genCamaro
I want the cam & heads
Mike
07-21-2005 | 07:51 PM
#29
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by 1genCamaro
what's the info on the cam and how much?
The cam is spoken for at this time.
07-21-2005 | 07:52 PM
#30
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by InsomZ
Sorry to see the car go man. you still gonna be doing side work on Ls1's?
From what it looks like right now, the car will still be around. The other parts around it wont be...Ill rebuild it when there is no car payment
If it does sell im highly interested in a Fairmont Coupe 2dr here in the apartment complex... 
07-21-2005 | 08:33 PM
#32
Originally Posted by InsomZ
Sorry to see the car go man. you still gonna be doing side work on Ls1's?
of course he will. He still has to install my headers and Y... I just need to get my act together
07-22-2005 | 07:45 AM
#34
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by 01 Red WS6
of course he will. He still has to install my headers and Y... I just need to get my act together
07-22-2005 | 08:24 AM
#35
Originally Posted by V6 Bird
Price is posted.
Originally Posted by V6 Bird
LOL Whats the hold up on that anyway?
07-22-2005 | 12:01 PM
#36
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by V6 Bird
Price is posted.
Mike
07-22-2005 | 09:57 PM
#37
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by V6 Bird
Ford 9" with 3.70 gears, Aluminum Spool, Aluminum Center section, Custom 3 hole Relocation Brackets, Wolfe Drag Sway Bar....$2600.00 outright or $2500 with a 3 channel 3.23 rear end in good shape with sway bar and end links.
FAST 78 mm intake SOLD
LS6 intake for sale...$400 installed. $350 outright...I will throw in a stock tb and map sensor for $400 as well...Installed price above does not nto include this.
Shaner S2 TB SOLD
W1 Cam SOLD
Weld Draglites 15X3.5 fronts with less then 10 miles on the new tires, 15X10 rears with 7.5" BS with 28X10.5 Stiffs. $650 with lugs and front spacers. Or $500 plus chrome 16" Stock TA wheels no Curb rash. The rears are beadlocked.
Race-ready HD case T400 (less than 1,000 miles on it since freshen up) with Kolene steels, Blue clutches, HD sprague, Hughes Pro-Trans brake, PTC 3800 Nitrous stall for LS1, Yank X-member for stock style torque arms, Madman Dipstick and tube, Nitrous ready HD driveshaft with 1350 U joints, B&M Pro Ratchet shifter...$1500 outright or $1000 plus stock 4l60e with stall and driveshaft.
Edelbrock Victor Jr Stepped LS1 Race Headers. High Velocity Merge Collectors, 1 3/4 to 1 7/8 stepped with 3.5" collectors, O2 Bungs welded in place, collectors are Tigged on, 3 bolt flanged. Custom 3.5" Duals mandrel bent with X-pipe and Flo-Pro race mufflers dumped at the axle. These will not be seperated. They go as a matched combo. $700
ASP UD pulley-- SOLD
Custom LS1 Dry Kit....102 orifice TNT solenoid, 2 Bottles with -6an main line nipples, Fuel Pressure Spiker, WOT switch, Window Switch, main line, lines and solenoid and nozzle. Modified to flow 350rwhp...$600. You will need a boost referenced Fuel System to support this nitrous kit.
Aeromotive Fuel system from sumped stock Tank to rails and all lines. Includes A1000 pump and filter, Big 1/2" rails, Aeromtive boost reference regulator, Magnafuel Y-block. -10an from pump. -8an to the rails and regulator and -6an return. Never once did I have an issue with this setup vapor locking. Its all in how you design the system and wiring. Ill take $1000 for this setup. Will support over 800 hp. Deal pending
Eiback ProKit with Hal Struts and Shocks. $600 or $550 plus all stock parts.
AS I think of more things on the car Ill post them. These prices are not set in stone...I will not accept low ball offers. This stuff on the car has less then 10K on it all...Most of the stuff like Fuel system doesnt even have 1K on it.
I will sell the car as is with cracked water jacket for $12G. Rolling chassis $9G(no motor or trans, comes with all tubular chromoly front suspension, and 9" rear listed above) or fixed and race ready for $15G. This car is set up, and will run high 9's on pump gas. It runs deep 6's in the 1/8 deep 7's on the motor. Car makes 400rwhp on the motor over 625 on the nitrous with pump gas. Chassis with this setup has seen 1.3 60 foots.
Car is a 01 Formula V8 with T-tops and leather. Car has 22,022 on the odometer. Originally an A4 car. Car has No AC, heat still works, no PS. AC is still in working order, just needs installation.
Mike
FAST 78 mm intake SOLD
LS6 intake for sale...$400 installed. $350 outright...I will throw in a stock tb and map sensor for $400 as well...Installed price above does not nto include this.
Shaner S2 TB SOLD
W1 Cam SOLD
Weld Draglites 15X3.5 fronts with less then 10 miles on the new tires, 15X10 rears with 7.5" BS with 28X10.5 Stiffs. $650 with lugs and front spacers. Or $500 plus chrome 16" Stock TA wheels no Curb rash. The rears are beadlocked.
Race-ready HD case T400 (less than 1,000 miles on it since freshen up) with Kolene steels, Blue clutches, HD sprague, Hughes Pro-Trans brake, PTC 3800 Nitrous stall for LS1, Yank X-member for stock style torque arms, Madman Dipstick and tube, Nitrous ready HD driveshaft with 1350 U joints, B&M Pro Ratchet shifter...$1500 outright or $1000 plus stock 4l60e with stall and driveshaft.
Edelbrock Victor Jr Stepped LS1 Race Headers. High Velocity Merge Collectors, 1 3/4 to 1 7/8 stepped with 3.5" collectors, O2 Bungs welded in place, collectors are Tigged on, 3 bolt flanged. Custom 3.5" Duals mandrel bent with X-pipe and Flo-Pro race mufflers dumped at the axle. These will not be seperated. They go as a matched combo. $700
ASP UD pulley-- SOLD
Custom LS1 Dry Kit....102 orifice TNT solenoid, 2 Bottles with -6an main line nipples, Fuel Pressure Spiker, WOT switch, Window Switch, main line, lines and solenoid and nozzle. Modified to flow 350rwhp...$600. You will need a boost referenced Fuel System to support this nitrous kit.
Aeromotive Fuel system from sumped stock Tank to rails and all lines. Includes A1000 pump and filter, Big 1/2" rails, Aeromtive boost reference regulator, Magnafuel Y-block. -10an from pump. -8an to the rails and regulator and -6an return. Never once did I have an issue with this setup vapor locking. Its all in how you design the system and wiring. Ill take $1000 for this setup. Will support over 800 hp. Deal pending
Eiback ProKit with Hal Struts and Shocks. $600 or $550 plus all stock parts.
AS I think of more things on the car Ill post them. These prices are not set in stone...I will not accept low ball offers. This stuff on the car has less then 10K on it all...Most of the stuff like Fuel system doesnt even have 1K on it.
I will sell the car as is with cracked water jacket for $12G. Rolling chassis $9G(no motor or trans, comes with all tubular chromoly front suspension, and 9" rear listed above) or fixed and race ready for $15G. This car is set up, and will run high 9's on pump gas. It runs deep 6's in the 1/8 deep 7's on the motor. Car makes 400rwhp on the motor over 625 on the nitrous with pump gas. Chassis with this setup has seen 1.3 60 foots.
Car is a 01 Formula V8 with T-tops and leather. Car has 22,022 on the odometer. Originally an A4 car. Car has No AC, heat still works, no PS. AC is still in working order, just needs installation.
Mike
07-27-2005 | 08:01 AM
#39
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by V6 Bird
Ford 9" with 3.70 gears, Aluminum Spool, Aluminum Center section, Custom 3 hole Relocation Brackets, Wolfe Drag Sway Bar....$2600.00 outright or $2500 with a 3 channel 3.23 rear end in good shape with sway bar and end links.
FAST 78 mm intake SOLD
LS6 intake for sale...$400 installed. $350 outright...I will throw in a stock tb and map sensor for $400 as well...Installed price above does not nto include this.
Shaner S2 TB SOLD
W1 Cam SOLD
Weld Draglites 15X3.5 fronts with less then 10 miles on the new tires, 15X10 rears with 7.5" BS with 28X10.5 Stiffs. $650 with lugs and front spacers. Or $500 plus chrome 16" Stock TA wheels no Curb rash. The rears are beadlocked.
Race-ready HD case T400 (less than 1,000 miles on it since freshen up) with Kolene steels, Blue clutches, HD sprague, Hughes Pro-Trans brake, PTC 3800 Nitrous stall for LS1, Yank X-member for stock style torque arms, Madman Dipstick and tube, Nitrous ready HD driveshaft with 1350 U joints, B&M Pro Ratchet shifter...$1500 outright or $1000 plus stock 4l60e with stall and driveshaft.
Edelbrock Victor Jr Stepped LS1 Race Headers. High Velocity Merge Collectors, 1 3/4 to 1 7/8 stepped with 3.5" collectors, O2 Bungs welded in place, collectors are Tigged on, 3 bolt flanged. Custom 3.5" Duals mandrel bent with X-pipe and Flo-Pro race mufflers dumped at the axle. These will not be seperated. They go as a matched combo. $700
ASP UD pulley-- SOLD
Custom LS1 Dry Kit....102 orifice TNT solenoid, 2 Bottles with -6an main line nipples, Fuel Pressure Spiker, WOT switch, Window Switch, main line, lines and solenoid and nozzle. Modified to flow 350rwhp...$600. You will need a boost referenced Fuel System to support this nitrous kit.
Aeromotive Fuel system from sumped stock Tank to rails and all lines. Includes A1000 pump and filter, Big 1/2" rails, Aeromtive boost reference regulator, Magnafuel Y-block. -10an from pump. -8an to the rails and regulator and -6an return. Never once did I have an issue with this setup vapor locking. Its all in how you design the system and wiring. Ill take $1000 for this setup. Will support over 800 hp.
Eiback ProKit with Hal Struts and Shocks. $600 or $550 plus all stock parts.
AS I think of more things on the car Ill post them. These prices are not set in stone...I will not accept low ball offers. This stuff on the car has less then 10K on it all...Most of the stuff like Fuel system doesnt even have 1K on it.
I will sell the car as is with cracked water jacket for $12G. Rolling chassis $9G(no motor or trans, comes with all tubular chromoly front suspension, and 9" rear listed above) or fixed and race ready for $15G. This car is set up, and will run high 9's on pump gas. It runs deep 6's in the 1/8 deep 7's on the motor. Car makes 400rwhp on the motor over 625 on the nitrous with pump gas. Chassis with this setup has seen 1.3 60 foots.
Car is a 01 Formula V8 with T-tops and leather. Car has 22,022 on the odometer. Originally an A4 car. Car has No AC, heat still works, no PS. AC is still in working order, just needs installation.
Mike
FAST 78 mm intake SOLD
LS6 intake for sale...$400 installed. $350 outright...I will throw in a stock tb and map sensor for $400 as well...Installed price above does not nto include this.
Shaner S2 TB SOLD
W1 Cam SOLD
Weld Draglites 15X3.5 fronts with less then 10 miles on the new tires, 15X10 rears with 7.5" BS with 28X10.5 Stiffs. $650 with lugs and front spacers. Or $500 plus chrome 16" Stock TA wheels no Curb rash. The rears are beadlocked.
Race-ready HD case T400 (less than 1,000 miles on it since freshen up) with Kolene steels, Blue clutches, HD sprague, Hughes Pro-Trans brake, PTC 3800 Nitrous stall for LS1, Yank X-member for stock style torque arms, Madman Dipstick and tube, Nitrous ready HD driveshaft with 1350 U joints, B&M Pro Ratchet shifter...$1500 outright or $1000 plus stock 4l60e with stall and driveshaft.
Edelbrock Victor Jr Stepped LS1 Race Headers. High Velocity Merge Collectors, 1 3/4 to 1 7/8 stepped with 3.5" collectors, O2 Bungs welded in place, collectors are Tigged on, 3 bolt flanged. Custom 3.5" Duals mandrel bent with X-pipe and Flo-Pro race mufflers dumped at the axle. These will not be seperated. They go as a matched combo. $700
ASP UD pulley-- SOLD
Custom LS1 Dry Kit....102 orifice TNT solenoid, 2 Bottles with -6an main line nipples, Fuel Pressure Spiker, WOT switch, Window Switch, main line, lines and solenoid and nozzle. Modified to flow 350rwhp...$600. You will need a boost referenced Fuel System to support this nitrous kit.
Aeromotive Fuel system from sumped stock Tank to rails and all lines. Includes A1000 pump and filter, Big 1/2" rails, Aeromtive boost reference regulator, Magnafuel Y-block. -10an from pump. -8an to the rails and regulator and -6an return. Never once did I have an issue with this setup vapor locking. Its all in how you design the system and wiring. Ill take $1000 for this setup. Will support over 800 hp.
Eiback ProKit with Hal Struts and Shocks. $600 or $550 plus all stock parts.
AS I think of more things on the car Ill post them. These prices are not set in stone...I will not accept low ball offers. This stuff on the car has less then 10K on it all...Most of the stuff like Fuel system doesnt even have 1K on it.
I will sell the car as is with cracked water jacket for $12G. Rolling chassis $9G(no motor or trans, comes with all tubular chromoly front suspension, and 9" rear listed above) or fixed and race ready for $15G. This car is set up, and will run high 9's on pump gas. It runs deep 6's in the 1/8 deep 7's on the motor. Car makes 400rwhp on the motor over 625 on the nitrous with pump gas. Chassis with this setup has seen 1.3 60 foots.
Car is a 01 Formula V8 with T-tops and leather. Car has 22,022 on the odometer. Originally an A4 car. Car has No AC, heat still works, no PS. AC is still in working order, just needs installation.
Mike
Mike