My buddy doing a heads, cam, stall, tranny, and exhaust swap and wondering who in the dfw area could chassis tune his car for a reseaonable price. He wants a great tune, but doesnt want t be ripped, any suggestions?

 

RPM, Fastech or Speedtek in Haltom city could do it

 

Take it to SimpleQuick Racing
SQR -> Site sponsor
I'm loving my speed density tune!

 

Thanks for the words Brandon , we can take care of you here , or if your in dallas fastech would probly be closer to ya ( we are in ft.worth )
Daniel

 

Daniel, don't sell yourself short

Your work is worth the drive from Dallas. There are other shops a hell of a lot closer to me, but my car is still sitting @ SQR , now isn't it?

 

I will probably be giving SQR a call then, yea if the rep is that good, I will drive anywhere really. Thanks guys.

 

Who is doing the tuning over there?

 

How much does a SD tune cost?

 

Simple quick is worth the drive, great customer service

 

Daniel and/or Dr. Blair depending on the combination and what kind of tune you are looking for. The SD tunes take quite a bit of work, Scott is usually punching the keys while Daniel runs the dyno and checks out the datalogging. Either one of them is more than capable of working with the HP tuner software.

They do Fords as well if you know anybody with one. Daniel just bought all of the SCT software.

 

Best tuning in DFW i know of is extreme horsepower in north richland hills.

 

Do they have a chassis dyno? What software do they use? I've never heard of them. The only tuner I know of anywhere around there is Bill Duke.

 

Is Billy doing LS1 tuning? I know he does some tuning on Buick GN's but I didn't know he was doing any LS1 tuning.

 

Yeah they have a dyno. They just opened up shop earlier this year. I dont know **** about tuning so i dunno the programs. Its two dudes and one of their dads. Chris and Chris graduated from SAM. Full machining,engine builds,installs, etc. Great guys Excellent customer service.

 

Don't anyone hijack the thread or start anything, but I would go to Fastech and let Sean do the tuning, he has been doing for many years, and is really good at it. Be careful who you trust to do your tuning - some do not know what they are doing. Happy Hunting!!

 

Everyone I know that has gone to SQR has been happy with everything

 

Not that I know of but just because it has two more cylinders, more compression and no boost doesn't mean he can't tune it

Between SQR and Fastech you can't go wrong. If you are West of Irving I'd probably hit up SQR, otherwise head East.