Fs: New stage 3 heads
#1
Staging Lane
Thread Starter
Join Date: Jul 2005
Location: Bryan
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Fs: New stage 3 heads
Specs: (Assymbled) ls1 castings
Milled .50
58cc combustion chambers
Heat coated Rev valves
Heat coated chambers
Comp beehive springs good to .650 lift
Tituanim retainers
intake runners 215cc
exhaust runners 70cc
intake vavle size 2.02, exhaust 1.57
5 angle valve job
Intake flow numbers
.100 80
.200 148
.300 205
.400 257
.500 282
.550 293
.600 303
These heads have never been run. BRAND NEW. Im going with more CI's then I first planed so they need to go. The work was done by by precision porting out of florida. http://precisionporting.com/
In a m6 c5 identical heads with F13 cam (230,232) and long tubes made 465 rwhp on 92! Im taking a price cut at $1500.00 + shipping, I need the money quick to get my new heads .Shipping should be 40.00 anywhere in the us. I will take paypal or money order. If paypal add 3% to the total cost.
If the distance is reasonable I might meet buyer somewhere.
Ill throw in a new set of new Comp hardend pushrods that I got for the heads because they are milled.
Contact me by:
Cell (979)777-2500
or PM
Milled .50
58cc combustion chambers
Heat coated Rev valves
Heat coated chambers
Comp beehive springs good to .650 lift
Tituanim retainers
intake runners 215cc
exhaust runners 70cc
intake vavle size 2.02, exhaust 1.57
5 angle valve job
Intake flow numbers
.100 80
.200 148
.300 205
.400 257
.500 282
.550 293
.600 303
These heads have never been run. BRAND NEW. Im going with more CI's then I first planed so they need to go. The work was done by by precision porting out of florida. http://precisionporting.com/
In a m6 c5 identical heads with F13 cam (230,232) and long tubes made 465 rwhp on 92! Im taking a price cut at $1500.00 + shipping, I need the money quick to get my new heads .Shipping should be 40.00 anywhere in the us. I will take paypal or money order. If paypal add 3% to the total cost.
If the distance is reasonable I might meet buyer somewhere.
Ill throw in a new set of new Comp hardend pushrods that I got for the heads because they are milled.
Contact me by:
Cell (979)777-2500
or PM