What to do for some extra hp
What to do for some extra hp What can i do to my 98 formula 6speed to get some extra horsepower that doesnt cost alot of money. Did is my 1st sportscar please give me some advise. I allready have a lid. whatelse please help. My friends are talking ****
a cutout or ported throttle body would be a good fairly inexpensive way to go. Also may wanna consider an underdrive pulley
Last edited by H/C LS6Z; Feb 13, 2006 at 05:54 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
BOSS APPROVED!
go with the n2o and make sure you keep all the extra **** out of you car i ran up at the track one day and the best i could cut was 8.8's cleaned out the car and ran solid 8.6's two days later (i was hauling around a floor jack, about 20 bottles of oil, and my books)
on the free:
Free mods, fuel filter (if you havent changed it in the last 20k miles).
on the cheap:
long tubes, y pipe, catback, cut out.
LCA's, torque arm, panhard bar, shifter.
drag radials, line lock.
cam/roller rockers
Not so cheap:
N20, blower/turbo.
Heads/cam
Josh
Free mods, fuel filter (if you havent changed it in the last 20k miles).
on the cheap:
long tubes, y pipe, catback, cut out.
LCA's, torque arm, panhard bar, shifter.
drag radials, line lock.
cam/roller rockers
Not so cheap:
N20, blower/turbo.
Heads/cam
Josh