Thanks Simple Quick!
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Mar 2003
Posts: 8,009
Likes: 0
From: North Texas
Thanks Simple Quick! Daniel @ SQR took care of my motor R&R and also put an F13 in my TSP 347 and assembled my heads before installing them, not to mention installing lowering springs, motor mounts, exhaust tips, and a catch can all while my car was up at his shop. Also helped swap out my Moser 9" w/Brandon's stock ten bolt. It turned out great and puts down some wicked power. Doc tuned it using Speed Density, and it runs like a champ. No issues starting, and no issues driving it in traffic or in low RPMs. Pulls like a bat out of hell too, great power on the street, which is right where I wanted it.
Just wanted to post up a few good words about the quality of work they're doin over there. Here's a graph of my car right after they finished tuning it - only had 700 miles on it.
Just wanted to post up a few good words about the quality of work they're doin over there. Here's a graph of my car right after they finished tuning it - only had 700 miles on it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Great torque Travis. Bet you're glad to be driving it again. 
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Mar 2003
Posts: 8,009
Likes: 0
From: North Texas
Thanks guys!
To answer some questions, she idles perfect. You can definitely tell there is a cam in there, as I have one of the loudest y-pipe setups you can get and still keep a catback and sound good - Stepped Kooks, Kooks ORY and GMMG. However she idles around 800 and doesn't stumble at all. She dips a little when you come to a stop, but only drops a little - nothing crazy at all.
Patrick, the torque is crazy, but I still have a stock rear end so I can't bust on it too hard. After I move thats the first thing that I'll be saving up for - a new 9". It needs some more gearing anyhow, the 3.89 would be perfect - thats what I ran before. Right now she'll bust the tires loose at just about any speed, its great. I'm going to dyno her again on the March dyno day @ SQR hopefully, we'll see if she's loosened up any - I doubt it - but who knows. I think about about 5k miles the power will go up a little.
Yea, the car was down for a few months as I tried to get the best deals I could - on a tight budget - but Daniel was real understanding about that.
Chris - just give me a shout sometime man, I'm pretty busy w/work now @ the new job but we can find a time to get together and you can check her out. I may even be selling the GMMG after I get my SLP dual/dual fixed up - we'll see how it sounds.
Brandon - we can swap cars for a day any time
To answer some questions, she idles perfect. You can definitely tell there is a cam in there, as I have one of the loudest y-pipe setups you can get and still keep a catback and sound good - Stepped Kooks, Kooks ORY and GMMG. However she idles around 800 and doesn't stumble at all. She dips a little when you come to a stop, but only drops a little - nothing crazy at all.
Patrick, the torque is crazy, but I still have a stock rear end so I can't bust on it too hard. After I move thats the first thing that I'll be saving up for - a new 9". It needs some more gearing anyhow, the 3.89 would be perfect - thats what I ran before. Right now she'll bust the tires loose at just about any speed, its great. I'm going to dyno her again on the March dyno day @ SQR hopefully, we'll see if she's loosened up any - I doubt it - but who knows. I think about about 5k miles the power will go up a little.
Yea, the car was down for a few months as I tried to get the best deals I could - on a tight budget - but Daniel was real understanding about that.
Chris - just give me a shout sometime man, I'm pretty busy w/work now @ the new job but we can find a time to get together and you can check her out. I may even be selling the GMMG after I get my SLP dual/dual fixed up - we'll see how it sounds.
Brandon - we can swap cars for a day any time
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
Originally Posted by Pwebbz28
NICE curve! I have a dumb question. Why is it every dyno i see there is a small dip around 4300 rpm?