90mm Fast Intake & T/B
Thread Starter
Teching In
Joined: Apr 2004
Posts: 19
Likes: 0
From: South Texas
90mm Fast Intake & T/B Who is running this Fast 90mm TB & Intake? What kind of power can I expect by adding these bolt ons. I currently have a 600/601 lift cam on a 230/234 on a 112lsa. Will this set up better my current LS6 intake/ported tb?
Post up.....
Post up.....
i heard you may not see much more than maybe 10/15 hp/ tq. i believe they are more beneficial for the larger cube motors. i will be going with the same setup but all i had is a stock intake and ported t.b.
dont quote me on those numbers.
dont quote me on those numbers.
I was thinking about the same thing, but I think for a cammed car a ls6 and ported TB should be fine, maybe youll gain a few HP with the FAST. Our cams are similar in size as well.
Really 5-10 whp/tq depending on cams for stock cubes. Mine netted about 7whp and the best I have had a customer do is about 11whp. Its that last little touch to get them maxed out.
Brandon
Brandon
Originally Posted by 408WS6
I'm holding out hoping that something even better than FAST will come out in the next 6 months - 1 year. If not, I'll probably go with a FAST.
Brandon
Trending Topics
Originally Posted by xfactor_pitbulls
There already is something. A heavily ported vic. jr. It will flow more, but do you have the engine to pull more. Or if you are a big dog, go grab a harrop.
Brandon
Brandon
Last edited by 408WS6; Apr 18, 2006 at 10:59 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Addict
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
You would have to use a 90 degree elbow mounted on top of the intake manifold inorder to retain the stock air box, it may not fit under a stock hood.
Originally Posted by 408WS6
I have a 408. Will that (Victor Jr) fit under a stock hood?
Originally Posted by Elite_Hot_Rod
You would have to use a 90 degree elbow mounted on top of the intake manifold inorder to retain the stock air box, it may not fit under a stock hood.
Originally Posted by jeremym
I gained 24rwhp and 10rwtq on a H/C stock cube motor.It is in the retune w/ the 90/90 combo
Brandon
Originally Posted by 408WS6
Yeah, thats what I thought. I was aware of that intake, but that 90 deg elbow looks ugly imo. I'll just stick w/ my LS6 until something else better than a FAST comes along that fits under a stock hood and doesn't look ugly
Brandon
Originally Posted by xfactor_pitbulls
Other than sheetmetal stuff like the beck or something custom made, I wouldnt hold your breath.
Brandon
Brandon
Hey man thanks for the advice. I'll be sure and not.....*hold my breath*
Originally Posted by LS1 Stealth
Yeah guys I am still thinking of getting the FAST 90MM T/B & Intake. But am hoping to get some good gains. $1200 for 7 to 11 rwhp & rwtq might just be okay...I guess.
Originally Posted by LS1 Stealth
Yeah guys I am still thinking of getting the FAST 90MM T/B & Intake. But am hoping to get some good gains. $1200 for 7 to 11 rwhp & rwtq might just be okay...I guess.
Brandon