Turns out the guy that told me he was going to buy everything backed out, I guess, he just dropped contact

****pending****'99 shortblock with 60K miles, each cylinder pressure tested right at 170psi +/- 5. Flycut pistons, double roller timing chain. This shortblock and the below heads and cam put down 460/410 with a fast intake and full mufflex exhuast out the back. $1200 picked up

A set of my stage 2 853 heads with 2.02/1.60 ferrea valves. They flow about 305 at .600 and 205 at .300, intake, and 210-215 on the exhaust. Gotta look for the flow sheet. Milled .030. Patriot gold springs, and about 10K miles on the setup. I am going to freshen up before they go out. $900+shipped

Another set of stage 2 241s that again someone backed out on after I started on MY core in good faith They flow almost exactly the same as the above set. Unmilled and come with ferrea 2.02/1.60. You can have without hardware for $700 shipped or I will include a new patriot kit installed for $900 shipped.

****pending****TSP 231/237 .595/.598 $250 + shipping 10K miles

****pending****Dynatech 1 3/4 race headers with slip on collectors, collectors need to sanded good and repainted. The rest of the header has about 70% of the coating in decent shape. Not going to lie, they arent perfect. But hard to go wrong at $250.

***sold***7.40 hardend pushrods $50

(2) stock rocker sets, I dont know what they go for.........

pistons and rods out of a 6.0 iron block, $100.00 just need new rings

90mm Fast intake and throttle body, its is already ported, but I took it to the max and had a part of the o-ring show its crown in one of the runners. Gonna buy a new inner shell before it is sold. TB is the late edition with no problems $1,000 for both+ shipping.

*****sold****MTI Lid and K&N air filiter, little crack at the neck, it should be expoxied. $75+ shipping

***sold***SVO red top injectors. I dont know how many miles, $150+shipping

6 speed out of an f-body, bought for project but never used $850

75mm maf with ported maf ends $75 + shipping.

I think I have some more stuff...........have to look around

I take paypal and NO CALLING DIBS. Looking to sell everything asap.

pm me for questions

Brandon

 

ill take the push rods

 

paypal...................info@xfactorpitbulls.com

Whoever gets payment on an item first can have it. Just be sure to check if payment has been received on your item before you send.

$60 shipped for the pushrods

 

nvm man sorry to backout but i dont want to deal with paypal...i thought u were in houston sorry for the troubles i caused u

 

Its ok, they already sold anyways.

 

are the headers mid-length? and does it come with a Y-pipe or need a Y-pipe?, i am very interested with cash in hand, but i am going out of town today till saturday. PM me with more details please.
thank you
-Saad

 

No Y-pipe, need to get a y-pipe made to mate up. For $250, you get the headers in the picture and that is all. Pictures here https://ls1tech.com/forums/lsx-parts-sale/517323-stuff-back-up-sale-plus-more.html

Brandon

 

Bump for sold and added 6 speed trans

 

are the 241's sold? do you have a flow sheet?

 

No they are not sold, and yes I do.

Lift Intake Exhaust
.200 140 100
.300 203 139
.400 252 168
.500 289 187
.600 304 210
.700 311 215

 

Bump TTT for addition for (2) f-body 6 speeds
One is out of my car, and the other is out of a donor for a project, it works fine but we went with a TKO 6 speed. $850 for the project tranny

The trans out of my car is in good shape, only been to the strip once.
Come with a fresh spec 3, spec flywheel, mcleod adjustable master, and B&M ripper. Want to sell as a package $1,500.

(2) Muncie 4 speeds, both rebuilt and in good shape $450 a piece

Brandon

 

hey, I am ready to pick up the Headers. Cash in hand, PM me if you want to sell them soon.

 

They sold, thanks.

Brandon