Charlie Hustle

iTrader: (8)

i just recently had the motor changed on my drivers side, and it has been working fine. all of a sudden it doesnt do anything. before, when it was going bad it would at least go down slowly and get stuck, or creep back up, etc. now it does nothing. the passenger works just fine. i checked the fuse and it looks fine. does anyone know what it could be? thanks in advance

02Z28LS1

iTrader: (2)

sounds to me like the switch itself may have died on ya, or possibly a connection came loose inside there.....

Greed4Speed

iTrader: (7)

Connection, fuse, switch or relay.

kickassT/A

iTrader: (3)

if that all checks out, try taking the door pannel off and tapping on the motor with a hammer... sometimes the brushes get stuck and the motor wont do anything. just tap it lightly a few times and it free up and start working

Inspector12

iTrader: (29)

And if that doesn't work try replacing the motor again LOL! They go out very easily.

Charlie Hustle

iTrader: (8)

if all that doesnt work....ill be giving you a call again

Charlie Hustle

iTrader: (8)

where is the relay located?

LawHorn

iTrader: (11)

i told you what to do slam the crap out of your door. That happened to me all the time in old blue. haha

Charlie Hustle

iTrader: (8)

tried it...didnt work. trey you need to list the beater in your sig

Greed4Speed

iTrader: (7)

Fuse is in the fuse box.
Relay is above the throttle. Little box ~the size of a cigarette pack sitting in a metal "pocket" on the inner side of the firewall. Just lay on your back and you should see it.