New dyno #'s for the SS
New dyno #'s for the SS 438 hp and 439 ft lbs of tq.
A/F wasn't reading.
Not to bad for a car that hasn't been dyno tuned and still on the stock timing table.
MS3 with some old truck heads.
A/F wasn't reading.
Not to bad for a car that hasn't been dyno tuned and still on the stock timing table.
MS3 with some old truck heads.
Originally Posted by eric01ss
so what does the setup consist of?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Forteen3GT
Nate... by far the best sounding car I have ever heard!!! 
That is exactly what I told Richard while it was on the dyno!
That is exactly what I told Richard while it was on the dyno!
Originally Posted by Forteen3GT
so.. what exhaust setup??
bought the entire set up for 450 bucks (including headers)
Originally Posted by NaSSty Nate
some hooker lt's, and lane's 3 in duals with twisters.
bought the entire set up for 450 bucks (including headers)
bought the entire set up for 450 bucks (including headers)
Originally Posted by Forteen3GT
must be the cam... thats the exact setup I have minus the V6Bird mod! I have 23"... yours?
The heads he has flow ALOT better then yours do...Its the same CNC port that i have access to at a huge discounted rate through my guy. its his port that is digitized at TEA.
With the right valving and valve job, and sometimes even hand finishing there's some crazy numbers to be had out of them. 
Originally Posted by NaSSty Nate
438 hp and 439 ft lbs of tq.
A/F wasn't reading.
Not to bad for a car that hasn't been dyno tuned and still on the stock timing table.
MS3 with some old truck heads.
A/F wasn't reading.
Not to bad for a car that hasn't been dyno tuned and still on the stock timing table.
MS3 with some old truck heads.
NICE NUMBERS NATE!
Congrats that is crazy for you mods. Congrats man!