WTB 10 Bolt Rear!!!
Thread Starter
12 Second Club
iTrader: (49)
Joined: May 2006
Posts: 966
Likes: 0
From: College Station, Texas
WTB 10 Bolt Rear!!! Hey guys I am looking for a 10 bolt complete rear with preferrably 3.73's or 4.10's, axles, bearings with no noises or issues. I know what they normally go for and will offer a fair price...I am also willing to look at the stock 3.42 rear if any one has one as well. The rear needs to be a series 3 and have abs and traction control (4channel).
Tia
Josh
Hook me up!!!
Tia
Josh
Hook me up!!!
Thread Starter
12 Second Club
iTrader: (49)
Joined: May 2006
Posts: 966
Likes: 0
From: College Station, Texas
Originally Posted by Eddiep
Did yours blow up? My 9" should be here within a week, and I've got a quiet 3.42 4 channel rear end in my T/A right now with 63k miles.
. How much would you be asking...I'm not real excited about the 3.42's but I am open to it b/c 4 channels are hard to come by... Thread Starter
12 Second Club
iTrader: (49)
Joined: May 2006
Posts: 966
Likes: 0
From: College Station, Texas
Originally Posted by Inspector12
I have a built 3:73, but I want $550 for it perfect condition has about 14K on it total and about 3500 when we went through it. I had to upgrade before I destroyed it LOL!
Thread Starter
12 Second Club
iTrader: (49)
Joined: May 2006
Posts: 966
Likes: 0
From: College Station, Texas
Originally Posted by daniel6718
if you have a good stock 3.42 rear ill trade plus some cash for my 3.73 rear
send me a pm
send me a pm
.Let me know if you wanna part with just the rear however...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by connexion2005
Ouch...$550...? Thats half of a used 9 inch or twelve bolt. Not knocking because hey its your rear and you set the price so don't take that the wrong way. What all was involved in the build? (Gears, bearings, axles)
Josh...thats not a bad deal...you should jump on that IMO. if i had 550 id be all over it. by the way, used 12 bolts are at least 1700 bucks and in good condition still around 1900 or 2000. granted spending 100 or 200 is cheaper than 550 but you also get 3.73s and itll hold up better for DR's and putting you into the mid to upper 12's
Originally Posted by connexion2005
ive seen them go on the regular for 150 to 300 though
Thread Starter
12 Second Club
iTrader: (49)
Joined: May 2006
Posts: 966
Likes: 0
From: College Station, Texas
ok ttt...I still never got one. My requirements have changed as I have required some information about converting 3 and 4 channels. It doesn't matter if the rear end you have is a 3 or 4 channel. It needs to be quiet and have no issues at all though! Let me know what you have...I would prefer 3.73's or 4.10's since I will be troubling myself with the swap but post up if you can entertain a good 3.42 rear as well...