Ghost Machine for sale
#1
Ghost Machine for sale
Selling the Ghost Machine.
No reason other then I have done everything I can do to the car and I am looking to start my next project.
I am thinking of fixing up a 1962 corvette.
I have always loved that body style and something about a pearl white/machine accent with an LS7 slammed on HRE's just seems interesting.
I have thought about keeping the z06 while doing the older vette.
- But I barely drive this as it is so it would kind of be pointless to have 2 setting in the garage.
------------------------------------------------------------------------------------------------------------------------------------------------------------
Car: 2003 Z06
Miles: 13855
Factory Options:
Fully Loaded Z06
Exterior Modifications:
Iforged Classics/Hennessey Venom 5R’s (Black Anodized Center with Polished Lip), 18 x 9.5 Front and 18 x 11 Rear with BFG KDW Tires and Nitto Drag Radials
Starcraft Cowl Hood
CustomGhost Flames and Painted Rear Valance
Interior Modifications:
Corbeau Seats
Custom Harness Bar
Corbeau 6pt Belt System
Performance:
Iron Block 408 with Lunati 4.00 inch - 4340 Forged Crankshaft, Lunati Pro Billett 6.125 I-Beam Rods and Wiseco Ceramic Coated Pistons
(9.5 Compression)
Elderbrock Victor Jr. Intake with Custom Intake Elbow
LS2 Throttle Body
Custom blower Camshaft
Stage III LS6 Cylinder Heads with 2.08 intake and 1.60 Ferrea exhaust valves Childs & Albert Duramoly Rings
Federal Mogul 152 M Main Bearings
Clevite Bearings
ARP Main and Head Studs
Rollmaster Double Roller Timing Chain
Comp Cams 7.400 Hardened Chromoly Pushrods
Jesel SS 1.7 Rocker Arms
Crane Hydraulic Roller Lifters
Comp Cams 921 Dual Springs
Corsa TI exhaust / Custom 3" cutout.
Power adder:
NX Nitrous Kit
ATI F1C Procharger Supercharger
- Accessories:
Alkycontrol Methanol Injection Kit
Custom Mounted Air/Fuel and Fuel Pressure Gauges
Computer
Wideband LS1Edit PCM Tuning
Suspension/Chassis:
N/A ( lowered 2 1/2in )
Drivetrain:
6 Speed Liberty Pro-Built Transmission
Spec Stage V Clutch
Fidanza Flywheel
Kirban Short Shifter
3.42 Geared Rear Differential with DTE Hardened Internals
Baer Eradispeed Rotors with Ceramic Pads
Electronics:
Custom Stereo System with TV/DVD Player, Amplifiers and Subwoofer
Exterior Pics:
Interior Pics:
Engine Pics:
Videos:
Dyno video of race gas pull on biggest pulley.
http://www.youtube.com/watch?v=o6KR6FgQkyg
Idle video of 408/F1
http://www.youtube.com/watch?v=2wJvLeGnfuQ
Video @ Z06fest in Oct. 07'
(10sec pass/First place in Autocross)
A short video of Ghost Machine at the '07 Z06fest in Bowling Green, KY. 10/18- 10/20/07. 1/4 mile & auto-x
Coverage:
The car is featured as the centerfold in VETTE magainze (Dec. 07' issue) Please ref: GHOST IN THE MACHINE
Car has been featured in a Nitto advertisement spread.
Car has won numerous first place trophies in local car shows in and around the Houston area.
Car is very well known in the online community.
------------------------------------------------------------------
The car is extremely reliable and has been a blast to drive and show.
Price:
Not sure how accurate KBB.com is but this is how I am coming up with the price of the car.
Current private party value of a 2003 Z06 in Excellent condition is
$37,700.00
To match what is done in interior/exterior modification's you will spend more then $50.000.00.
Anyone who has knows these cars can tell you this is a pretty accurate estimate with the work that has been done.
Please note: (receipt upon request I have all documents)
37700est
50000est
-------
$87700est
Subract the 50% rule for modifactions: $25000.00est
37700est
25000est
-------
$62700est
Contact information:
Email: garettoli@gmail.com
Phone: send me an e-mail or pm me for number
No reason other then I have done everything I can do to the car and I am looking to start my next project.
I am thinking of fixing up a 1962 corvette.
I have always loved that body style and something about a pearl white/machine accent with an LS7 slammed on HRE's just seems interesting.
I have thought about keeping the z06 while doing the older vette.
- But I barely drive this as it is so it would kind of be pointless to have 2 setting in the garage.
------------------------------------------------------------------------------------------------------------------------------------------------------------
Car: 2003 Z06
Miles: 13855
Factory Options:
Fully Loaded Z06
Exterior Modifications:
Iforged Classics/Hennessey Venom 5R’s (Black Anodized Center with Polished Lip), 18 x 9.5 Front and 18 x 11 Rear with BFG KDW Tires and Nitto Drag Radials
Starcraft Cowl Hood
CustomGhost Flames and Painted Rear Valance
Interior Modifications:
Corbeau Seats
Custom Harness Bar
Corbeau 6pt Belt System
Performance:
Iron Block 408 with Lunati 4.00 inch - 4340 Forged Crankshaft, Lunati Pro Billett 6.125 I-Beam Rods and Wiseco Ceramic Coated Pistons
(9.5 Compression)
Elderbrock Victor Jr. Intake with Custom Intake Elbow
LS2 Throttle Body
Custom blower Camshaft
Stage III LS6 Cylinder Heads with 2.08 intake and 1.60 Ferrea exhaust valves Childs & Albert Duramoly Rings
Federal Mogul 152 M Main Bearings
Clevite Bearings
ARP Main and Head Studs
Rollmaster Double Roller Timing Chain
Comp Cams 7.400 Hardened Chromoly Pushrods
Jesel SS 1.7 Rocker Arms
Crane Hydraulic Roller Lifters
Comp Cams 921 Dual Springs
Corsa TI exhaust / Custom 3" cutout.
Power adder:
NX Nitrous Kit
ATI F1C Procharger Supercharger
- Accessories:
Alkycontrol Methanol Injection Kit
Custom Mounted Air/Fuel and Fuel Pressure Gauges
Computer
Wideband LS1Edit PCM Tuning
Suspension/Chassis:
N/A ( lowered 2 1/2in )
Drivetrain:
6 Speed Liberty Pro-Built Transmission
Spec Stage V Clutch
Fidanza Flywheel
Kirban Short Shifter
3.42 Geared Rear Differential with DTE Hardened Internals
Baer Eradispeed Rotors with Ceramic Pads
Electronics:
Custom Stereo System with TV/DVD Player, Amplifiers and Subwoofer
Exterior Pics:
Interior Pics:
Engine Pics:
Videos:
Dyno video of race gas pull on biggest pulley.
http://www.youtube.com/watch?v=o6KR6FgQkyg
Idle video of 408/F1
http://www.youtube.com/watch?v=2wJvLeGnfuQ
Video @ Z06fest in Oct. 07'
(10sec pass/First place in Autocross)
A short video of Ghost Machine at the '07 Z06fest in Bowling Green, KY. 10/18- 10/20/07. 1/4 mile & auto-x
Coverage:
The car is featured as the centerfold in VETTE magainze (Dec. 07' issue) Please ref: GHOST IN THE MACHINE
Car has been featured in a Nitto advertisement spread.
Car has won numerous first place trophies in local car shows in and around the Houston area.
Car is very well known in the online community.
------------------------------------------------------------------
The car is extremely reliable and has been a blast to drive and show.
Price:
Not sure how accurate KBB.com is but this is how I am coming up with the price of the car.
Current private party value of a 2003 Z06 in Excellent condition is
$37,700.00
To match what is done in interior/exterior modification's you will spend more then $50.000.00.
Anyone who has knows these cars can tell you this is a pretty accurate estimate with the work that has been done.
Please note: (receipt upon request I have all documents)
37700est
50000est
-------
$87700est
Subract the 50% rule for modifactions: $25000.00est
37700est
25000est
-------
$62700est
That being said I am asking $59.900
Please also note: For out of state buyers. (in the united states)
I will purchase your plane ticket if you decide to buy the car after review. But I prefer a local sale as I still would like to see it cruise the streets of Houston.
I will purchase your plane ticket if you decide to buy the car after review. But I prefer a local sale as I still would like to see it cruise the streets of Houston.
Contact information:
Email: garettoli@gmail.com
Phone: send me an e-mail or pm me for number
#2
Big decision there Garett, but I'm sure your next toy will be even better. You saw the older Corvette in the Procharger booth at SEMA right? Sweet car, Procharged LSX with Forgeline wheels.
http://www.seatstaysup.com/forums/mi...s/IMG_3020.htm
http://www.seatstaysup.com/forums/mi...s/IMG_3020.htm
Trending Topics
#12
#19
#20