Have a question about doing a ls6 intake swap and pulley
03-26-2008, 07:48 PM
#1
Staging Lane
Thread Starter
iTrader: (11)
Join Date: Dec 2007
Location: Dallas
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Have a question about doing a ls6 intake swap and pulley The one's who have done this have you use this:
http://www.ls1howto.com/index.php?article=5
or do you need the other colant lines?
I also have the block off plates for the EGR and AIR..
One last question, do you need to buy a bolt for a U/D pulley?
http://www.ls1howto.com/index.php?article=5
or do you need the other colant lines?
I also have the block off plates for the EGR and AIR..
One last question, do you need to buy a bolt for a U/D pulley?
03-27-2008, 09:23 AM
#5
Staging Lane
Thread Starter
iTrader: (11)
Join Date: Dec 2007
Location: Dallas
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
For the rear colant plugs #12562788 is there another part # cause cant seem to find these with that part# or did you just use the colant pipe its self?