Snap-on no longer makes the LS-1 Rachet??
09-19-2003, 02:55 PM
#1
Snap-on no longer makes the LS-1 Rachet?? I call it the LS1 ratchet, since its the FAR most used tool for me on these cars.
But I CANT find it in the new catalog. I dont want bending handles, I want a handle that hinges around the center of the head. And it has to be a shorty.
Dammit! I better never lose the one I have.
(its a 1/4 inch ratchet)
chris
But I CANT find it in the new catalog. I dont want bending handles, I want a handle that hinges around the center of the head. And it has to be a shorty.
Dammit! I better never lose the one I have.
(its a 1/4 inch ratchet)
chris
09-19-2003, 10:42 PM
#5
Re: Snap-on no longer makes the LS-1 Rachet ??????? This only show this one on line (the handle sucks for tight spaces, IMO).
http://buy1.snapon.com/catalog/pro_d...mp;dir=catalog
http://buy1.snapon.com/catalog/pro_d...mp;dir=catalog
09-20-2003, 08:44 AM
#6
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Locust Fork, AL
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Re: Snap-on no longer makes the LS-1 Rachet ??????? i found me another rachet 
that is if they stil make it
that looks 100 times better than the Craftsman bent neck with the bending handle thing
can you lock the swiveling head in place, or is it always free?
that is if they stil make it
that looks 100 times better than the Craftsman bent neck with the bending handle thing
can you lock the swiveling head in place, or is it always free?
09-22-2003, 01:23 PM
#7
Re: Snap-on no longer makes the LS-1 Rachet ???????
i found me another rachet
that is if they stil make it
that looks 100 times better than the Craftsman bent neck with the bending handle thing
can you lock the swiveling head in place, or is it always free?
that is if they stil make it
that looks 100 times better than the Craftsman bent neck with the bending handle thing
can you lock the swiveling head in place, or is it always free?
chris
Trending Topics
09-24-2003, 01:46 AM
#8
Re: Snap-on no longer makes the LS-1 Rachet ??????? Looks like the 3/8" drive SK 3870 http://www.sktools.com/pc_subsection...mp;ItemID=1628
or the 43875 which is similar but slightly thinner around the head.
I have two 3870's. One is about 6 years olde and one is over 40 years olde. I love them.
Too bad the 1/4" by SnapOn is disco...
or the 43875 which is similar but slightly thinner around the head.
I have two 3870's. One is about 6 years olde and one is over 40 years olde. I love them.
Too bad the 1/4" by SnapOn is disco...
10-07-2003, 07:38 PM
#9
TECH Fanatic
Join Date: Nov 2001
Location: Mi./Al.
Posts: 1,757
Likes: 0
Received 0 Likes
on
0 Posts
Re: Snap-on no longer makes the LS-1 Rachet ??????? jmd, I pride myself on having a very good selection of tools, I've never seen that type of rachet. Thanks for the link.
Al
Al
01-11-2004, 02:24 AM
#15
Well, I see the TH737 on SnapOns site, but they don't seem to have the TH747 on their site. Should have gotten a catalogue at thanksgiving from a relative who works for them.
The SK 43875 isn't listed on sktools.com.
Maybe the local place still has one; they did a few months ago.
The SK 43875 isn't listed on sktools.com.
Maybe the local place still has one; they did a few months ago.
01-19-2004, 11:57 PM
#16
Originally Posted by jmd
Well, I see the TH737 on SnapOns site, but they don't seem to have the TH747 on their site. Should have gotten a catalogue at thanksgiving from a relative who works for them.
The SK 43875 isn't listed on sktools.com. Maybe the local place still has one; they did a few months ago.
The SK 43875 isn't listed on sktools.com.
Maybe the local place still has one; they did a few months ago.
01-25-2004, 09:51 PM
#19
Teching In
Join Date: Jan 2004
Location: The Motor City
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Visceral, I feel your pain! Those are the best damn ratchets money can buy, especially when working on LS1's
I was looking at the latest snap-on catalog I have and found these P.N.'s
# TM738, 1/4 drive chrome handle ratchet (like the one in your pic)
# TM737 1/4 drive black plastic handle ratchet (I use this one)
# F748 3/8 drive chrome handle ratchet
# F747 3/8 drive black plastic handle ( got this one too)
All of these ratchets have the same head design like the one in your pic. They must have changed part numbers?? for some reason.
I was looking at the latest snap-on catalog I have and found these P.N.'s
# TM738, 1/4 drive chrome handle ratchet (like the one in your pic)
# TM737 1/4 drive black plastic handle ratchet (I use this one)
# F748 3/8 drive chrome handle ratchet
# F747 3/8 drive black plastic handle ( got this one too)
All of these ratchets have the same head design like the one in your pic. They must have changed part numbers?? for some reason.
