I would not want to get that place dirty! 
Workshop/ Garage
Thanks Y2K and some people like the tail lights some dont but there staying for now.
We finally got the floors painted again two more coats on and they feel great. My dad also got the baseboards on and the door frames and the framing on the floor is for a the big white cabinet you see in some of the pictures.
We finally got the floors painted again two more coats on and they feel great. My dad also got the baseboards on and the door frames and the framing on the floor is for a the big white cabinet you see in some of the pictures.
we got the structure local to us in Central Florida they are two 20x20x10 carports put together. there is extra braces and we replaced the sheets with a thicker gauge on the top. the storage area we extended the roof line with red iron beams and the close it in with the extra sheets we had. we paid about $1500 for each carport but there about 750 more now that price is installed too we modified ours to much for them to install but that is an option.
here is a example of what it looked like befoer we changed it.
here is a example of what it looked like befoer we changed it.
This weekend we got the cabinet in and alot of painting baseboards, door frames, door, and cabinet. Next weekend were planning on painting the houase and maybe the outside of the building.
no updates on the shop there probably wont be much going on with it for the next month or so since were moving my Aunt again next week. Then I will be moving back in with my parents next month so alot of moving stuff.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Ryan there is an outlet behind the TV my dad is not to good with wiring and cables I will be cleaning that up tomorrow when im over there and getting the surround sound working.
Got the storage area cleaned up some and added a 16' shelf. Im moving back to my parents house so some of my stuff will go under the shelf the stack of wood will become doors and cabinets and once that is done the SS will be in there also.
Very Nice, I live in MS and they have a place down the road that sells structures like that. Been wanting to get one and yours pushes more in that direction. I also looked into the full blown metal buildings with the bigger metal girders but they are just so expensive, you can get into $20k for a nice size garage. The frame work of your is like 3"x3" or bigger? How high is the roof?
Great Job!
Great Job!
The main pieces of the frame is 2x4 and at the sides it is 10 feet high not sure about the peak. there is also extra bacing all over and we upgraded the roof sheets also and added red iron for the back wall and door side.
here is an update on the shop its pretty much finished inside just organizing things and we still need to make some cabinets. also there is some photos of what we have been working on redesigning two of those cheap pole carports. the frame is finished just have to get the ground finished and through the tarp on. this area will cover the Camper, Pontoon Boat and my SS until the storage area is cleaned out enough to put the SS in there. also threw a picture of my LS6 Intake that im getting ready to put on and I finished my block off plate for the ashtray and it will have an Ipod Dock and my cutout switch. thanks for all the compliments and here are the pictures.
