ordered me a new plasma cutter
Thread Starter
Formerly darynC-10/23/10
iTrader: (19)
Joined: Aug 2006
Posts: 2,301
Likes: 0
From: gonzales louisiana
ordered me a new plasma cutter millers spectrum 625 X-treme- with case 
needed somehting lightweight and portable, i figure this will suit my needs as the thickest ill prolly cut with this is 1/2" anything thicker ill leave it to the hypertherm 1250
heres a link with some info!
http://www.millerwelds.com/products/...m_625_x-treme/
ill post a review when it comes in early next week !
needed somehting lightweight and portable, i figure this will suit my needs as the thickest ill prolly cut with this is 1/2" anything thicker ill leave it to the hypertherm 1250
heres a link with some info!
http://www.millerwelds.com/products/...m_625_x-treme/
ill post a review when it comes in early next week !
Thread Starter
Formerly darynC-10/23/10
iTrader: (19)
Joined: Aug 2006
Posts: 2,301
Likes: 0
From: gonzales louisiana
this is cheaper and it has a higher rated capacity. and when using with a CNC plasma table. hypertherm is basically the brand everyone uses. not to mention it comes with a 25ft torch vs the miller 12ft.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
