$40 LS flywheel holding too
07-28-2013, 06:39 AM
#2
Teching In
Thread Starter
Join Date: Feb 2013
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
here is photo Great guy to work with too.
A NEW TOOL TO EASE THE INSTALLATION AND TO CORRECTLY TORQUE THE BALANCER BOLT ON YOUR LS GM ENGINE.
DOING A CAM CHANGE ? GOT TO TORQUE THAT BALANCER BOLT. YOU NEED THIS TOOL.
INSTALLING A FLYWHEL/FLEXPLATE ? LOCKS THE WHEEL SO YOU CAN
TORQUE THE CRANK BOLTS
THIS WILL WORK ON ALL AUTOMATIC AND MANUAL FLYWHEELS IN
REAR DRIVE PLATFORMS.
CAN USE ON THE ENGINE STAND OR IN CAR, JUST DROP STARTER AND BOLT IN.
COMES WITH PROPER LENGTH MOUNTING BOLTS
A NEW TOOL TO EASE THE INSTALLATION AND TO CORRECTLY TORQUE THE BALANCER BOLT ON YOUR LS GM ENGINE.
DOING A CAM CHANGE ? GOT TO TORQUE THAT BALANCER BOLT. YOU NEED THIS TOOL.
INSTALLING A FLYWHEL/FLEXPLATE ? LOCKS THE WHEEL SO YOU CAN
TORQUE THE CRANK BOLTS
THIS WILL WORK ON ALL AUTOMATIC AND MANUAL FLYWHEELS IN
REAR DRIVE PLATFORMS.
CAN USE ON THE ENGINE STAND OR IN CAR, JUST DROP STARTER AND BOLT IN.
COMES WITH PROPER LENGTH MOUNTING BOLTS
09-04-2013, 01:13 PM
#5
Not being offensive at all, but if you have the motor upside down and out of the car, cant you just use a pair of vise grips to do the same thing??
Seems a waste of $40 when most of us have already spent $10 or more on a tool that does the exact same thing.
Seems a waste of $40 when most of us have already spent $10 or more on a tool that does the exact same thing.
09-19-2013, 11:04 PM
#7
Great guy to work with too.
A NEW TOOL TO EASE THE INSTALLATION AND TO CORRECTLY TORQUE THE BALANCER BOLT ON YOUR LS GM ENGINE.
DOING A CAM CHANGE ? GOT TO TORQUE THAT BALANCER BOLT. YOU NEED THIS TOOL.
INSTALLING A FLYWHEL/FLEXPLATE ? LOCKS THE WHEEL SO YOU CAN
TORQUE THE CRANK BOLTS
THIS WILL WORK ON ALL AUTOMATIC AND MANUAL FLYWHEELS IN
REAR DRIVE PLATFORMS.
CAN USE ON THE ENGINE STAND OR IN CAR, JUST DROP STARTER AND BOLT IN.
COMES WITH PROPER LENGTH MOUNTING BOLTS
A NEW TOOL TO EASE THE INSTALLATION AND TO CORRECTLY TORQUE THE BALANCER BOLT ON YOUR LS GM ENGINE.
DOING A CAM CHANGE ? GOT TO TORQUE THAT BALANCER BOLT. YOU NEED THIS TOOL.
INSTALLING A FLYWHEL/FLEXPLATE ? LOCKS THE WHEEL SO YOU CAN
TORQUE THE CRANK BOLTS
THIS WILL WORK ON ALL AUTOMATIC AND MANUAL FLYWHEELS IN
REAR DRIVE PLATFORMS.
CAN USE ON THE ENGINE STAND OR IN CAR, JUST DROP STARTER AND BOLT IN.
COMES WITH PROPER LENGTH MOUNTING BOLTS
