glad to hear it is working out. does it repel water oil or liquids?

 

All of the "painted" floors here- www.ultimatecoatings.org are a high solids 2 component solvent based epoxy with an acrylic aliphatic urethane topcoat. These floors are resistant to anything that an automobile can possibly spew.
They have a nice gloss and different kinds of aggregate added for a non-skid surface.

 

u guys will be fine as long as u prep the floor first by having it sand blated or getting it acid washed but then u can apply a two part epoxy set up

the key is letting the paint settle long enough before u guys put stuff back on it
i know since I work at sherwin williams

 

temp of the air and floor will have an effect on how long cure time is too. well at least it does for the stuff i install