SK spline rachet wrenches (new design)
#1
TECH Veteran
Thread Starter
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
SK spline rachet wrenches (new design)
Has anyone used these new design gear wrenches by SK?
They have a series of 32(??) teeth that grip all types of fasteners - 6 point 12 point, square, t-hex, rounded heads, etc.
The grippping teeth look like the splines....
Anyway, they are illustrated in the new Sears catelog that I received recently. They are sold in sets that are metric - 8, 10, 12, 14, etc....
Wild; right? Looks like a great new design!
I'm not familar with the new Snap-On wrenches that grab the fastner head on the side and not on the points but this design is likely similar....
Can anyone compare the two designs?
They have a series of 32(??) teeth that grip all types of fasteners - 6 point 12 point, square, t-hex, rounded heads, etc.
The grippping teeth look like the splines....
Anyway, they are illustrated in the new Sears catelog that I received recently. They are sold in sets that are metric - 8, 10, 12, 14, etc....
Wild; right? Looks like a great new design!
I'm not familar with the new Snap-On wrenches that grab the fastner head on the side and not on the points but this design is likely similar....
Can anyone compare the two designs?
#2
TECH Addict
iTrader: (4)
Snap-On calls their "flats, not points" socketing design Flank Drive®. SK calls theirs SureGrip®. SK sockets grab just fine; that's what my 3/8" and 1/4" drive sockets are, brand-wise.
Spline drive isn't exactly new. Given that I have never come across spline fasteners, I would never bother getting into that style of socket / wrench.
The wrenches at sears are not reversible direction, & thusly don't have a mild (12-15 deg) offset to the box end. Thusly, I would skip them.
On smaller fasteners, 6pt. is fine. On larger fasteners, 12pt. is the way to go in order to give better accessibility for latching onto a fastener.
Maybe one day Harbor Freight will carry spline drive items so you can invest in those.
Spline drive isn't exactly new. Given that I have never come across spline fasteners, I would never bother getting into that style of socket / wrench.
The wrenches at sears are not reversible direction, & thusly don't have a mild (12-15 deg) offset to the box end. Thusly, I would skip them.
On smaller fasteners, 6pt. is fine. On larger fasteners, 12pt. is the way to go in order to give better accessibility for latching onto a fastener.
Maybe one day Harbor Freight will carry spline drive items so you can invest in those.