FS:Kent moore Getrag corvette diff tools
06-05-2006, 08:43 PM
#1
Teching In
Thread Starter
Join Date: Nov 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
FS:Kent moore Getrag corvette diff tools Sold
I have a set of kent moore corvette differential tools available. They are about a year old and were purchased new. They are hardly used and in great condition.
First kit is the J42168 which includes:
J42168-1 gauge cylinder
J42168-2 gauge assembly
J42168-7 depth gauge
J42168-9 holding strap
J42168-11 rear pinion centering assembly
J42168-13 gauge plate assembly
J42168-15 compressor assembly
J42168-16 spacer
The second kit is the J44616 which includes:
J29369-2 left output shaft bearing remover
J42155 diff lifting tool
J42157 left output shaft bearing installer
J42159 diff side bearing remover
J42162 side gear compressor
J42164 pinion gear holder
J42166 front pinion bearing remover
J42170 bearing and race installer
J42172 bearing race installer/spanner wrench
J42194 bearing race remover
missing from this kit is theJ36797 output shaft seal installer
Both kits come with carrying cases. They are in excellent condition and have not been abused. They have only been used a half a dozen times. Included with the kits is an instructional video on setting up differentials.
I have a set of kent moore corvette differential tools available. They are about a year old and were purchased new. They are hardly used and in great condition.
First kit is the J42168 which includes:
J42168-1 gauge cylinder
J42168-2 gauge assembly
J42168-7 depth gauge
J42168-9 holding strap
J42168-11 rear pinion centering assembly
J42168-13 gauge plate assembly
J42168-15 compressor assembly
J42168-16 spacer
The second kit is the J44616 which includes:
J29369-2 left output shaft bearing remover
J42155 diff lifting tool
J42157 left output shaft bearing installer
J42159 diff side bearing remover
J42162 side gear compressor
J42164 pinion gear holder
J42166 front pinion bearing remover
J42170 bearing and race installer
J42172 bearing race installer/spanner wrench
J42194 bearing race remover
missing from this kit is theJ36797 output shaft seal installer
Both kits come with carrying cases. They are in excellent condition and have not been abused. They have only been used a half a dozen times. Included with the kits is an instructional video on setting up differentials.
Last edited by nv my c5; 06-12-2006 at 09:23 PM.
