kent moore tool list
#1
kent moore tool list
I did a search and didn't come up with much, I was looking for a list with all the kent moore part numbers and what the corresponding tool is. There's a few tools I'd like to have and don't want to spend $1500 on the kit. Thanks.
#3
On The Tree
iTrader: (3)
Join Date: Jun 2006
Location: Westminster, MD
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Here you are:
Item Number Description
Kent Moore Tools
Jx41476 Front and Rear Cover Alignment (at crankshaft seal area)
Jx41478 Crankshaft Front Oil Seal Installer
Jx41479 Crankshaft Rear Oil Seal Installer
Jx41480 Front and Rear Cover Alignment (at oil pan surface)
Jx41558 Crankshaft Sprocket Remover
J 42078 Valve Stem Oil Seal Installer
Jx42386 Flywheel Holding Tool
This list of tools cost me $705.00.
Kent Moore also offers a LS1 kit at around $1500.00. Saw one on here for $1200.00.
I got mine at Rydell Chevrolet: 319-849-1233 ask for the Service Mgr.
Ken
Item Number Description
Kent Moore Tools
Jx41476 Front and Rear Cover Alignment (at crankshaft seal area)
Jx41478 Crankshaft Front Oil Seal Installer
Jx41479 Crankshaft Rear Oil Seal Installer
Jx41480 Front and Rear Cover Alignment (at oil pan surface)
Jx41558 Crankshaft Sprocket Remover
J 42078 Valve Stem Oil Seal Installer
Jx42386 Flywheel Holding Tool
This list of tools cost me $705.00.
Kent Moore also offers a LS1 kit at around $1500.00. Saw one on here for $1200.00.
I got mine at Rydell Chevrolet: 319-849-1233 ask for the Service Mgr.
Ken
#6
recently helped a chevrolet dealer clean out the specialty tool room , I have boxes of kent moore tools. If some one could send me a tool list.I will be able to catorgize and sell some of the tools and diagnostic equiptment 3030dun email me @ weldthiss@yahoo.com