I found these part #'s.

10105379 Stock 48mm throttle body gasket
12524653 Intake manifold gasket set
12552469 Exhaust manifold gasket set
10168457 Stock .049" head gaskets
12369145 Head Gasket Kit (includes intake/heads/exhaust/etc)
10128293 Front cover (timing cover) gasket
12552428 Front cover Optispark Seal
10128316 Front cover crank seal
12553792 Water pump drive seal
10217886 Water pump bearing seal
10128343 Water pump gasket (2)
12527741 LT1 Water Pump
10046089 Centerbolt Valve Cover Gasket
12337972 EGR Valve Gasket
10055726 EGR Tube Gasket
10108676 Oil Pan Gasket
12370835 LT4 Extreme Duty Roller Timing Set
12555885 LT4 Roller Timing Set Cam Gear (95+ LT1)
12555886 LT4 Roller Timing Set Crank Gear (95+ LT1)
12555887 LT4 Roller Timing Set Roller Chain (95+ LT1)
10128346 LT1 Link-Chain Timing Set Crank Sprocket
10128485 LT1 Link-Chain Timing Set Link Chain
10128349 93-94 LT1 Link-Chain Timing Set Cam Sprocket
10126039 95+ LT1 Link-Chain Timing Set Cam Sprocket
10457293 Optispark Cap & Rotor Kit (inc bolts/cover/o-rings)
22146273 left motor mount (LT1)
22146274 right motor mount (LT1)
12555714 Rear main seal housing gasket
17113086 Pressure regulator seal kit
10115875 1LE AC delete pulley
16188051 94-95 LT1 PCM
16188309 Knock module - LT1 95 Impala SS
16217700 Knock module - LT1 F-Body OBD-I
16214661 Knock module - LT1 F-body OBD-II
16214671 Knock module - LT1 Corvette
16214681 Knock module - LT4 Corvette
16214691 Knock module - LT1 Impala
26026792 Pinion seal
9785792 Pinion crush sleeve
9783762 Pinion nut
26029185 Series 3 Carrier ABS Reluctor (Speed sensor reluctor)
9417784 Pinion bearing outer assembly
22510042 Pinion bearing assembly-inner
9420095 Carrier bearing assembly
26016661 Differential cover gasket
12345977 Mobil 1, 75W-90 Synthetic Gear Lube, GL-5
26039989 93-97 f-body stock driveshaft (steel 2.5"d, wall 0.065"t, 40.8"l, 16 lbs)
10085375 1LE 87-92 f-body driveshaft (aluminum, 2.75"d, wall 0.130"t, 12.2 lbs)
25008308 3.5" MAF sensor
2503679 1 bar MAP sensor

 

Still ready & willing... Oh yeah!!! I work 2:30pm to midnite(central time) mon-fri... So I'm at my computer ready to spit out #'s

BTW Fenix, I got you covered on your pm.

Mike.

 

ttt

Hey guys, still here and willing to help!

 

Hi!

So.. where is the love for us poor lonely parts guys.

 

Why hasn't this happened? It seems like a very good idea, and there seems to be support to make it happen.

 

I agree.

 

Definitely would be an asset.. Adding it to my list, I'll make some contacts when I get some other things off the top of this (long, and ever increasing) list

 

Here's a bunch of LS1 part numbers to get started from, plus a list of trim package codes: http://www.evlls1.com/gmparts.html

 

Is the GM parts center open on new years????LOL!

3rd gen Camaro / Firebird 82-92 outside mirror any idea where to get the mirrormotor bracket inside the mirror shell????
This little bracket holds the motor and is mounted with 3 srews to the mirror shell!
We have the GM parts book but it only lists the glass,gasket....motor!

 

i can help you out if need be . also got a few things of my own to add to your increasing list

 

I'm not opposed to a parts section for GM parts, we can try it out.

 

This would save some time for fellow car fanatics, instead of having to call the dealership. The dealerships around this area wont give out part #'s.

 

That is all the available parts from GM. Sorry

 

Part number for a GM Blazer S10 V6 4,3 1999 ??????? HELP!!!!!

 

Hello,

I show 2 different part #'s depending on the 8th digit of the VIN:

If a 'W' code = GM # 88893274
If a 'X' code = GM # 88893276

Both #'s are NEW GM Goodwrench Longblocks complete with valve covers, timing cover, and oil pan. You have to swap: Intake, ehaust, and all accessories/brackets/pulleys. This comes with a 3YR/50,000 mile GM dealership warranty.

Hope this helps!

 

dammm sorry!
MAF PART NUMBER WANTED!

MAF for a IGNDT13W8XK209998 99 Blazer wanted!4,3 V6

Can you check on the Mirror "BRACKET" i postet a pic further up---THANX

 

Hey, no problem!

MAF # 25180303. It looks like it's used on most V6 applications (cars and trucks) from about 1994 till now.

Hope this helps!

P.S. see post # 33 for the mirror info

 

THANX this Ls1 swap is taking my brains out

Do you have a Ls1 Waterpump flow illustration/schematic diagram.

We want to put the Ls1 onto a engine/dyno stand without running the stock pump!
Some adapter plates are being used for this!
Can someone outline the "H" "X" "A" "T" holes if the given Pumpinlet is "C" and the Pumpoutlet is "R"

Radiator in
Radiator out
Pump in
Pump out

 

Well...

The problem is the GM catalogs don't show that type of info. The service manual should have it though. You can order the manual for the vehicle from Helm Inc. 1-800-551-4123.

 

we have them

need to check one

Thanx !