1988 iroc z camaro beautiful paint 400hp
#1
Teching In
Thread Starter
Join Date: Jul 2009
Location: Lansing,IL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1988 iroc z camaro beautiful paint 400hp
Year: 1988
Make: Chevrolet
Model: Camaro
Price: $0
Mileage: 85300
Private or Dealer Listing: Private Listing
Location (State): IL
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine
-Mid 1970’s gm 350 block 4 bolt mains with 509 casting bored .60 over. Block has been magnufluxed, hot tanked, pressure tested, bored, honed, decked, new main bearings, cam bearings, and freeze plugs. Stock 4 quart GM oil pan.
-The crank is stock and has been cut and polished, new meiling oil pump, GM pink rods, Keith Black .0100 domed pistons with new sealed pro rings. It also has gm roller timing chain.
-New Comp Cams xe268h cam with approximately 100 miles on it. Specs: Lift 477intk. .480ex. duration @ .050 224intk. 231ex. Lobe separation 110.
-New sealed pro lifters also with 100 miles on them.
-New Manley pushrods also with 100 miles.
-Heads have same mileage as the short block (minus cam, lifters, pushrods) and are World Product S/R torquer’s that have 170cc runners and 76cc combustion chambers. Springs good for.560” of lift. Manley valves 2.02 intake 1.6 exhausts. Rocker arms are from Proform and are full roller 1.6 rockers.
-New AC Delco spark plugs
-Distributor is brand new with 100 miles on it and is a HEI billet dizzy from big end performance.
-MSD 8.5mm wires
-Brand new gaskets, all Felpro everywhere also with 100 miles on them, New: Felpro one piece oil pan gasket, head gaskets, intake gaskets, valve cover gaskets, timing chain cover gaskets (new seal also), and header gaskets.
-New chrome gm timing chain cover, chrome fuel pump block off plate, and chrome chevy valve covers.
-New sfi approved flex plate.
-Headman full length headers ( 1 5/8 primairies) into 2.5 exhaust w/ magnaflow bullets dumped before the axle
-Intake is an Edelbrock rpm performer intake.
-Holley 650cfm double pumper with dual feed line and fuel pressure gauge.
-Brand new intake bolts, valve cover bolts, motor mount bolts, motor to tranny bolts, and other misc.
-New stock replacement radiator.
-New gm performance 16” electric cooling fan.
I have receipts for all parts listed above. The Transmission is a GM TH-350 rebuilt with a shift kit and upgraded cultch’s and bands. Also has a TCI deep aluminum finned pan with a B&M 2,100 stall convertor. New B&M shifter cable, used B&M ratchet shifter, and trans cooler. The rear end is a stock 10 bolt with aluminum drum brakes and recently installed auburn posi, richmond 3.73 gears, and Summit rear diff cover. The rear suspension consists of: tubular panhard bar, tubular lower control arms, tubular edelbrock torque arms, and Lakewood 50/50 drag shocks. The car runs and drives great and has many new parts with lots of time and money invested in it. Like I stated before the body is very nice and the car gets lots of attention no matter where it’s at. If you have any more questions please call and ask. PLEASE SERIOUS INQUIRES ONLY. Thanks in advance, Tom. (708) 925 7015
$5,800 obo price is negotiable possible trades????
more pictures http://s917.photobucket.com/albums/ad15/redrock1988/