98 SS 408 iron block, pt88 680rwhp, $10k ASAP
03-31-2011, 05:49 PM
#1
Teching In
Thread Starter
Join Date: Feb 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
98 SS 408 iron block, pt88 680rwhp, $10k ASAP Year: 1998
Make: Chevrolet
Model: Camaro
Price: $10000
Mileage: 111000
Private or Dealer Listing: Private Listing
Location (State): FL
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Pensacola FL
408ci motor
6.0l iron block
Blueprinted&balanced
Eagle 4" crank
Eagle 6.125" rods
Wiseco 20cc dome pistons
317 ls heads
Ls6 intake painted black
Hardened pushrods
Custom grind turbo cam
Comp valve springs/retainers
Head studs
Main studs
arp manifold bolts
Ls6 oil pump
Ls2 timing chain
P&p ls6 throttlebody
6.0 turbo kit
Pte t4 88mm turbo
Tial 50mm bov
Tial 44mm wastegate
Custom turbo piping/powdercoated
4" core front mount intercooler.
Silicone fittings with T-bolt clamps
60lb injectors
Twin 255 pumps w/hotwire kit
-8 feed line
-6 return line
Polished billet fuel rails
Aeromitive regulator w/pressure guage
Built d&d t56
Twin disc clutch
B&m short shifter w/shift ball
99+ wiring harness/computer swap
Tubular k member
Sphon torque arm
Sphon driveshaft safty loop
Spicer yolk
racing driveshaft
3.27 gears
Slotted&drilled rotors red calipers
Sunoco fiberglass cowl hood
Clear markers
Optima battery
Msd wires
Greddy catch can
Shorty filter
Chrome radiator cover
Chrome coil racks
Dual front mount fans
Full tripple pillar
Pro comp boost, fuel pressure
Aem wideband
15" Streetlies with 295/55s on rear
strange shocks rear, BMR springs
QA1 coilovers up front
TurboWerx Pump so no more drainage problems..
Last edited by 98SS88MM; 08-19-2011 at 03:17 PM.
07-29-2011, 07:13 PM
#2
Teching In
Thread Starter
Join Date: Feb 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Retuned at XXX, now has a full 4" exhaust, few other things. Doesnt over heat in the FL heat in traffic or anything. Car actually runs pretty good for all things considered. Might be interested in a trade, but not for another fbody. Maybe a fullsize or lifted truck.
Cash Price is now 15,800 with the wheels, exhaust etc.
Cash Price is now 15,800 with the wheels, exhaust etc.
07-30-2011, 06:12 PM
#5
Teching In
Thread Starter
Join Date: Feb 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
it still has a 10 bolt haha, it was "built" by previous owner. Seems to be fine, granted I dont do any clutch dumps (its not a track car). Future plans are possible th400, definitely getting a boost controller of some sort, 9in, and methanol kit to run 14-15psi on the street where this thing can make some real power. To be honest, I shouldnt sell this car because its close to being a bad ****, but ive been wanting to do a sn95 cobra lol.
I have some more pictures that I can email.
I have some more pictures that I can email.
Last edited by 98SS88MM; 08-08-2011 at 03:18 PM.
Trending Topics
07-31-2011, 11:36 PM
#8
Teching In
interested in a 2001 F2 procharged air to water intercooler with 10 gal ice tank Cobra built to max approx. 1200 rwhp...going to Tim Matherly in Ga in about 1 week for 1st tune...all fresh...no runs. Black car with only 5800 miles...1 owner.
08-01-2011, 04:05 PM
#12
Teching In
Thread Starter
Join Date: Feb 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
08-11-2011, 07:16 PM
#20
Launching!
iTrader: (4)
Join Date: Jul 2008
Location: Laramie, Wyoming - 7220' elevation
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
How does it hook on those 295 radials? I have an 02 z28 that I am running 295 radials on, but its a stalled auto and a nitrous car and it hooks hard. Any interest in trading btw? Its a easy 10 second, maybe 9 second car in Florida.