FS/Trade: 98 Corvette Coupe, Fully Built, 550HP, Immaculate
04-20-2011, 03:33 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
FS/Trade: 98 Corvette Coupe, Fully Built, 550HP, Immaculate Year: 1998
Make: Chevrolet
Model: Corvette
Price: $20500
Mileage: 58000
Private or Dealer Listing: Private Listing
Location (State): NJ
Color: Gray
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
LOOKING FOR (in an EVEN trade):
2004+ CTS-V (highly modified)
2006+ SRT8 vehicles
2003+ Mercedes E55 (with warranty)
2005+ Saleen
2005+ Corvettes
2006 + TBSS (highly modified)
(other similar modified vehicles may be considered, G8s, M3's, etc)
NO BIKES, TRUCKS, RACE CARS, etc.
Not looking for anything older than 2000-ish either please.
or if I have to put a cash price:
UPDATED 7/18
$20,000 WITHOUT CLUTCH SETUP
$20,500 WITH CLUTCH SETUP
This is my BOTTOM LINE price, no lower offers please b/c they will not be accepted.
Would much rather find a suitable trade......
1998 Chevrolet Corvette coupe
Pewter ext/Black int
58K miles
Quick list of Modifications:
(all done by VetteDoctors in NY)
383ci
Callies forged crank
Callies forged rods
Mahle forged pistons
Trick Flow 215 heads
Harlan Sharp rockers
Custom grind cam
Fast 92 intake
90mm TB
Vararam intake
B&M shifter
Built rear diff, with hardened shafts
4.10 gears
Pfadt coilovers all around
Kooks Headers and X pipe
GHL catback
Lingenfelter minitub kit
Wilwood big brake kit (13" front and rear)
CCW C140 wheels- polished-
18x10 front w/275 Nittos
18x13 rear w/ 345 MT Dr's
484rwhp/423tq on safe break in tune still, has 500rwhp in it easily.
All mods have at most @ 1500 miles on them.
I also have a clutch setup for it as well, that is not installed.
The stock clutch has not given me any issue, but a new one was bought as extra insurance for the future.
I found a great deal on a new clutch setup
(Diamond Stage 2 clutch with everything inc new master, slave, throwout bearing, etc- $900+ worth still new in the box)
and I figured it was something that would need to be done eventually.
The good part is, you know the car has not been beaten on, as it is still running the stock clutch in it....and that wouldn't be possible unless it has been virtually babied....
The exterior- I would give a 9 out of 10. One small scratch at drivers door lock, and one small scuff underneath front bumper
The interior- I would also give a 9 out of 10, due to a small area where the thread/seam is pulling out on the drivers seat bolster (about 1" long).
I have major receipts for hard parts that are not visible (entire motor setup with install) as well as the receipts for install of other parts (brakes, suspension, exhaust, etc).....as you can see from the list above, there is easily $25K+ worth of just parts in the car.
I also have original booklets that came with car as well as the laminated window sticker.
If this is something you may be interested in, let me know and I can send you more pics and short video if you'd like.
Car is located in Southern NJ
stand66@hotmail.com
Thanks
Last edited by stand66; 07-18-2011 at 06:10 PM.
