1989 Camaro RS 350 5 speed
#1
Teching In
Thread Starter
Join Date: May 2011
Location: Fort Wayne, IN
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
1989 Camaro RS 350 5 speed
Year: 1989
Make: Chevrolet
Model: Camaro
Price: $2000
Mileage: 105000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Gray
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine
Engine:
350 block and bottom end -- rebuilt with new rings, and all bearings. About 11k on motor.
CompCams XE268 cam and lifters
New push rods
New Double chain and gears
Double Hump Heads with 2.02" valves
Performer RPM intake manifold
Edelbrock Carb (600 CFM if I remember right)
All new plugs and wires along with wire ties
New Chrome Alternator (100 Amps)
New Fuel Pump
New Belts
New Clutch and flywheel
Flowtech headers
Custom y-pipe
Suspension & Axle:
ALL new bushings and ball joints
Newer Steering links (4 years old)
Eibach Lowering Springs -- Pro
Spohn Rear lower control Arms -- New
Spohn Adjustable Panhard Bar -- New
KYB all around
Iroc Sway bars all around
Wonder Bar (steering Brace)
Auburn Limited Slip with 3.42 gears
Powder Coated Axle
Other:
Battery Relocation -- Mallory Aluminum box in the trunk. Used Welding cable as power wire.
Phenolic Spacer -- In the box never installed
New Fuel lines -- Aluminum
Coolant Overflow Relocation/Hidden
4 inch cowl hood -- nice and thick fiberglass. Bought it used but it's in great condition. Never had it on my car
Painted Engine Bay -- John Deere Blitz Looks Very clean and nice.
Everything electrical works -- except power locks, not sure why.
Heat Blows hot.
Interior is in decent Condition. Rear Seats are out but I still have them
I have a lot of time and money invested into this, but need to sell. I am sure I forgot something, so just ask or come check it out. This car will move and do it fast . Just needs paint and its complete! Asking $2000 but make me a reasonable offer. No trades please, I can't handle another car, that's the reason I'm selling this.
Pictures: http://s1093.photobucket.com/albums/i436/89camaro-RS/
Old Video (sounds the same): http://www.youtube.com/watch?v=35S5CaMK75U
#3
Teching In
Thread Starter
Join Date: May 2011
Location: Fort Wayne, IN
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
No mechanical problems. Locks work, just not getting any current to them. Everything else is excellent. All metal parts have been shot with epoxy and 1 coat of 2k primer. All plastic and fiberglass hood are sanded and ready to shoot.
#5
Teching In
Thread Starter
Join Date: May 2011
Location: Fort Wayne, IN
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts