lt1camaroman93

iTrader: (7)

Year: 1995
Make: Ford
Model: Mustang
Price: $25000
Mileage: 0
Private or Dealer Listing: Private Listing
Location (State): IN
LS Engine?: Car has other engine

I just blew up my second motor of the season in the second car. I've had enough and I'm taking a break.

1995 Mustang
25.3 chassis with current tag. Car has 5-8 full passes since being built and about 10 aborted passes(electrical/motor issues) Dual driveshaft loops built into the floor structure of the chassis
literally EVERYTHING minus front brakes where bought brand new for this build. Car is setup for turbo sbc/th400 Car fits a 29x10.5w with no problems. Different offest wheel and clearance the 1/4's a bit and it will fit a 31x10.5w. The mini-tubs are HUGE in this thing. Car is sanded down black pain with a purple trunk. Front and rear glass are brand new. Interior is bare bones. Most comfortable driver seat(Momo), RJS 5 point cam lock harness, and stock dash with everything gutted out of it. Still has a black headliner and door panels as well. Steering column is a race column with removable wheel. The wiring was done in a rush on this and its not pretty. Buyer can supply and parachute type system they would like and I will have the chassis shop install it on my dime. I'd suggest duals with launchers. If the car is purchased for close to my asking price, I will foot the bill on the chutes/spring launchers as well. The parachute that's on the car in the photos belongs on my orange car and will not come with this car.

Front Suspension
PA Racing drop k-member
PA Racing narrowed a-arms with heim joints
PA Racing 2" drop spindles for spindle mount wheels
Strange spindle mount brakes
Flaming river pinto rack
Race Craft bump steer kit
Strange 10 way struts
Strange coil over kit
Hypercoil 14x175 springs
CC Plates, forget brand
Billet Specialties Comp 5 spindle mount wheels
M/T 26x4.5 Front runners

Rear End
Narrowed and braced 8.8" with 9" ends
TA Performance diff cover
FMS 3.27 gear
Moser 35 spline axles
Moser Spool
5/8" drive studs
Race Craft adj lower control arm mounts
AFCO coil overs
12x125 springs
Custom Moly lca's with 3/4" FK rod ends
PA Racing adj uppers
Anti roll bar(forgot brand)
Strange dual caliper brakes
Billet Specialties 15x12 Comp 5 double beadlock wheels
Hoosier 28x10.5 c07

Misc

MSD 7531
MSD HVC-2
MSD 7562 boost controller
ARC 4 switch panel
Hurst pistol grip shifter
Oil pressure gauge
Shift light
4gal aluminum fuel cell in passenger front fender
16v battery
Flaming river battery cut off
B&M trans cooler and -6 braided lines
New in box Race Craft strut wing(will be mounted if the car stays around long enough)


I'm sure I'm missing something. 219-662-8643 is my office or text me at 219-741-9521 with any questions.

If someone would be interested in the NASTY alcohol sbc/turbo/computer/trans/converter that is in the car and the price is right I'll have it gone through and fixed up. For now, its getting pulled out and put on the stand. It dropped a valve seat.


Here's a video of the car
http://www.youtube.com/watch?v=XD73joq0NKM

Here's a link to a whole photo album of pictures of the build.

http://s19.photobucket.com/albums/b1...25%203%20SN95/


$25,000obo Will take trades for a BAD *** street car(vettes, supras, etc) nice truck, maybe a boat. Doesn't hurt to offer up whatever.