2002 35th Camaro ss/440hp/fab 9
10-26-2011, 06:33 PM
#1
Staging Lane
Thread Starter
Join Date: Feb 2010
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
2002 35th Camaro ss/440hp/fab 9 Year: 2002
Make: Chevrolet
Model: Camaro
Price: $15000
Mileage: 96797
Private or Dealer Listing: Private Listing
Location (State): KS
Color: Red
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
car is in good shape does have some ripples down quarters and dent in quarter but i will post pictures of problem areas.
Chromoly 10 point cage
Kirkey seat (not installed) 15 inch width
Cam lock 5 point harness'
power seats, windows, mirrors ect
Monster stage 3 clutch
monster chromoly flywheel (13 lb i think it was, it was the lightest one they had that wasnt aluminum)
Monster Pressure plate and slave
Tick speed bleeder
all put in last summer and have very few miles on them and mayb a handfull of passes
all of following second has less than 3000 miles.
PST 1000hp driveshaft
Midwest Chassis Fab 9 Rear end (stock width, backboned, large fill plug, drain plug)
4:11 gears
strange spool
moser 35 spline axels
Strange nodular iron case
chromoly short torque arm
BMR rear torque arms
Stock brakes (all around)
stainless braided rear brake lines
No ABS and no TCS
Dive shaft safety loop
1350 U-joints
EVERYTHING IS POWDER COATED AND LOOKS GREAT, RED COMPONENTS AND BLACK HOUSING AND 3RD MEMBER. DRIVE SHAFT IS POWDER COATED BLACK AS WELL
Comp engineering 3 way adjustable rear shocks
Vic Jr. intake manifold w/ sheet metal elbow
stock TB
42lb injectors
aeromotive 340 stealth fuel pump
racetronix fuel pump hot wire kit
Texas Speed 1 7/8 long tube headers
SLP LM1 catback with borla xr1 welded in place of LM1 "muffler" with nice 3 inch band clamps for everything
Trickflow 215 cnc'd cylinder heads
Comp oil shedding springs and retainers
(heads are setup correctly meaning springs are installed at recommended install height)
Harland Sharp 1.7 roller rockers
ARP Rod bolts
ARP harmonic balancer bolt
Speed density dyno tune
4 inch intake tube from lid to throttle body
Prothane Motor mounts
Prothane tranny mount
K&N Air filter and SLP Airfilter
Hypertech 160 Thermostat
HID headlight kit
Black berger panel with the camaro lettering shaved and also have original red ss berger panel
Weld RTS 15x10 and 15x4 with hoosier 28x11.50 (tires not even broke in yet and wheels and tires bought maybe 3 months ago)
Stock ws6 chrome wheels and tires (street)
BMR 3 point subframe connectors (welded)
This car has been taken good care of, i bought this car a 20 months ago and it was 100% stock then (also all the "problem spots" were there when i purchased it as well). I have put many hours into this car and it shows but i havnt had the money or time to enjoy this car at the track or on a more daily basis. My dad has become ill and mom has lost her job so money is very tight as im sure many of u can relate to. so..... im going to try and sell my car and buy something out right. if u are interested please contact me here, on my cell (316)258-4761, text or call is perfectly fine. Email me @ jakecraig45@yahoo.com If u are serious i am willing to drive and meet you to a certain extent (i live in kansas.) and i will try to post pictures but have had trouble doing so, so email or text works best for me and ill send you all the pictures you want.
This car makes 440hp at the rear tires on a dyno dynamics dyno on a 110 degree day and just shy of 440 ft lb tq.
It has run a best of 11.6 @ 119mph in 4000 DA and that was the 3rd pass the car made with all the new stuff so im sure its got a couple tenths in it with some seat time.
Ive probably forgot some stuff so get ahold of me for any other questions. I would like to get $15,000 but at this time i will entertain all SERIOUS offers. Thank you all.
At this time i am not interested in parting out, and the car will come with ALL oem parts as well, maf, rear end, drive shaft ect. and 95% of the receipts for parts.
