410 Stroker SS for sale
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2009
Location: Clarksville , TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
410 Stroker SS for sale
Year: 1993
Make: Chevrolet
Model: Camaro
Price: $10000
Mileage: 40
Private or Dealer Listing: Private Listing
Location (State): TN
Color: White
Transmission: Automatic
Drivetrain: Rear Wheel Drive
*95 lt1 block 4blt splayed arp studs on inner main and bolted outer. 60 over..magnafluxed. .decked, honed,cleared 4 stroker ,cleaned, line bored,lifter bores trued, arp head studs, All ARP bolts ..MLS Head Gaskets
*eagle custom forged stroker crank balanced to 20000rpm and nitrided
*custom eagle 6in h beam rods with the strongest arp bolts avail
*custom MAhle forged flat top forged and coated pistons
*fully balanced rotating assembly and clevite 77 coated sloted triarmor bearing. Custom timing set with no slack double roller by hebert racing
*prof prods sfi harmonic balancer.
*CSR electric water pump and biggest all aluminum radiator available with 160 stat.
*Trick flows biggest available twisted wedge heads max ported and flowed.bowls and intake/exh ports..bronze guides
behive double springs ..pushrod guides and chromoly hardened pushrods
*custom comp 292 extreme xfi cam ..full roller rockers..comp r lifters.
*mellings hv oil pump by moroso and custom moroso oil pain w p/u welded on.
*new gm optispark with DIS conversion (has coil packs) only uses opti for cam position reference
*BBK 58mm TB, Cold air intake, Fully hogged out Intake. EGR and Air inj removed and blocked. new Ford racing flow matched red injectors, aeromotive FPR , Dual Fuel pumps.
*weight reduction..removed a/c compressor..abs block..
*stage 5 built racing 4l60E with 3800 lockup YANK torque converter Sfi TCI flywheel arp bolts throughout.. trickshift premium fluid..
*energy suspension motor/tranny mounts and suspension setup.
*line lock with abs removed
*Complete bmr suspension bars
*bilstein shocks/struts eiback springs lowered
*welded in subframe connectors
*frame mount torque arm mount w/adj torque arm and driveshaft hoop
*inland empire sfi aluminum driveshaft
*BBK headers to custom groundpounder exhaust.. (flowmaster with pipes dumped before rearend)
*will include tuning software and laptop with custom base tunes
*has new Chrome 17" ZR1 wheels with new tires up front 275/35 and wider rims in rear with Drag radials 315's i believe that have some life left in them.
Car was painted recently and looks awesome..has your normal wear and tear. Rear end will need attention soon as its a stock 10bolt out of an 2000 SS with zexel torsion locker and 342 gear. I was going to upgrade the rear as its the only weak link but haven't got around to it. Contact Jeremy 615-426-6816
Video here http://youtu.be/aKeEBY1hlu0
Last edited by 410strokerss; 11-08-2011 at 11:05 PM.