FS LS1/T56 Notch
01-25-2013, 03:11 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2011
Location: Cleveland
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
FS LS1/T56 Notch Year: 1987
Make: Ford
Model: Mustang
Price: $7500
Mileage: 1
Private or Dealer Listing: Private Listing
Location (State): OH
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
The car is an 87 Mustang coupe, notchback if you prefer.
Engine:
LS1/T56 (6 speed) from a 04 GTO
LS6 intake
Trickflow cam 238/242 duration .595/.595 lift 112 lsa
Other:
Dynatech long tube headers
Dynamax exhaust
-6an braided fuel line w/ corvette fuel filter
Camaro cluster swapped in, all gauges work except fuel, separate gauge installed for that, speedo is slow, possibly speed sensor
Stock 8.8 rear end, was told it has 3.73 gears
On set of 10 hole rims for winter, drove on them all last year, but also have a set of pony wheels, crap tires for front but drag radials for rear.
Bad:
Car could use paint, it is faded and has spots with surface rust, under carriage is clean though, no rust.
No heat, climate control ***** were broken, but brand new heater core installed, just needs hoses run to it and new climate control ***** installed.
Wipers do not work. There are no arms/wipers, and they are not wired in, they just need to be extended due to rerouting for master cylinder for clutch. Motor and everything is there.
I ran best of 11.83 at 118 on slicks.
Car made 401whp on a mustang dyno.
Any questions just ask.
01-30-2013, 01:58 PM
#7
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2011
Location: Cleveland
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
More pictures.
Car:
With slicks:
With pony wheels:
Interior: Made piece to fit in where climate control normally is so there are no holes.
Drop out and parts:
Car:
With slicks:
With pony wheels:
Interior: Made piece to fit in where climate control normally is so there are no holes.
Drop out and parts:
