FS: 2002 Camaro Z28 (6.0 / 6spd)
10-15-2013, 06:49 PM
#1
FS: 2002 Camaro Z28 (6.0 / 6spd) Year: 2002
Make: Chevrolet
Model: Camaro
Price: $9500
Mileage: 92178
Private or Dealer Listing: Private Listing
Location (State): VA
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
2002 Camaro Z28 $9,500 OBO Located in Hampton Va
navy blue metallic
m6
92k miles
has t-tops, beige leather interior, fog lamps
Made 480rwhp 474 ftlb on dyno .
Looks:
17x9/17x11 ttm anthracite wheels with sumitomo front tires, good tread life, no wheel damage
SS reproduction spoiler
VFN sunoco hood
clear stock headlights
smoked clear turn signals
stainless Z28 badges and camaro bumper insert
rear camaro panel painted flat bumper black
metal grill in front bumper.
brake calipers painted blue/silver
slotted/drilled rotors
Interior:
30% tint on side windows, 5% on back, no discoloration
Tan leather drivers seat shows wear and is starting to seperate on the lower middle.
Sound:
single din touch screen Clarion head unit zd7000 with aux jack for phone/ipod
Engine only has approx. 12-13k since build
6.0 truck block, bottom end was put together by Patriot Performance
Stock Crank, Eagle rods, arp bolts, Manly forged flat top pistons with 2cc valve relief
All new bearings, Gm seals, and gaskets
PRC 5.3l stage 2.5 heads milled to 59cc chambers
.040 head gaskets
85mm lid
85mm Z06 maf
90mm ported polished nick williams throttle body
90mm FAST intake ported by Vengeance Racing
Cam: custom spec from Geoff @ EPS 230/234 .600/.612 on 113 Lsa
GM LS7 lifters
hardened pushrods
Yella terra ultralite rocker arms
ported LS6 oil pump
LS2 timing chain
42lb green top injectors
Walboro 255l fuel pump
Ford 8.8 center section grafted on camaro tubes, new Moser axles, 3:55 gears and limited slip and fabbed TA bracket
Transmission:
rebuilt by Joe at Six Speeds Inc, now he's at LMR
Textralia OZ700,pro 5.0 shifter...has slight chatter when taking off.
Lous short stick with white ball ****
Exhaust:
LPP stainless 1 3/4" headers
with flowmaster catback.
Suspension:
poly motor mounts
UMI Subframe connectors welded in
Bilstein shocks front and back selected by Sam Strano
Last edited by 11SECSS; 09-16-2014 at 04:45 AM. Reason: updated info
