Lt1Son

iTrader: (2)

Year: 1994
Make: Chevrolet
Model: Camaro
Price: $9200
Mileage: 156000
Private or Dealer Listing: Private Listing
Location (State): NY
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive

Motor/Clutch/-- Around 3000miles on them---Built for nitrous Performance work to the car. List as follows:

Car dynoed tuned at 373hp/389Rwhp--(have dyno sheet) Car ran a best of 12.4x w/ 1.74 60' on motor and ran 11.8 w/ 1.65 60' on a 75 shot (have slips) Im sure with the suspension dialed in and a bit more tuning should be 11s on motor and deep into 11s possible high 10s w spray

Engine-
- 0 Decked/Balanced Rotating Assy/Line Honed/New Freeze Out Plugs/Polished and turned stock crank all work done w torque plate
-4bolt main block .30 over/ mahle forged pistons/eagle h-beam 6" rods/ file fit rings/all arp harware/ high volume oil pump
-Heads mild port work with bigger valve 2.0 1.56/3 angle valve job /54cc Heads/w/ comp 987 double springs
-CC503 Cam 537/544 lift
-Comp 7/16" Ultra Pro Mag 1.6rr -Trickflow Guide Plates
-arp 7/16" screw in studs
-Canton Fabbed Valve Covers
-Double Roller Timing Chain
-Electric Water Pump
-Moroso CAI
-Trickflow Ceramic Intake Arm
-Borla stainless CME(center mount exhaust) with painted valance
-Pacesetter offroad longtube headers/y-pipe
-BBK twin 58mm tb
-Ported Intake
-30# Redtop Svo injectors
-New GM Opti/TR6 plugs/Wires
Suspension-
-Moser 12bolt with 4:11 gears
-Viking Double adjustable front coilovers w 300# race springs and 18 pos adjustable comp & rebound
-Viking Double adjustable rear shocks w 18 pos comp and rebound sitting on vogtland drop springs
-BMR adjustable torque arm
-BMR panhard bar
-BMR rlca's
-BMR tubular k-member(powdercoated hugger orange)
-BMR adjustable front lower control arms
-SPOHN fr. upper control arms
-Lakewood Driveshaft loop
-UMI 3 point Sfc's
-Brand New Fr Pads/Rotors
-Brand New R Pads/Rotors
-Fr Stainless brake lines
-New Rear Line W/ Adj Pro Valve

Transmission-
-6spd with spec stage 2+ clutch & pp
-stock lightened flywheel
-stock rims with m/t et streets >500 on them

Misc-
-Pioneer Deck W Aux output
-T-top Car
-SLP manual fan switch hi/low/stock operation function
-MSD Wires
-Autometer Level 2 Shift Light
-Scanmaster Lt1
-Walbro 255lph Fuel Pump
-SLP Custom Fit Cover
-Harwood 2.5" cowl hood-finished underside as well

BAD
-Headliner near visors just starting to come down(not 80s style drooping)
-window motors going slow
-Ac inop-needs compressor and condensor

Asking $9200 OBO--Price is neg--Paint is about 6yrs old have loads of pictures of paint as wel as motor process---845-325-8231 can call if interested