1999 Chevy Camaro z28 M6

09-25-2015, 08:09 PM

#1

stetay2233

Teching In

Thread Starter

Join Date: Feb 2009

Location: West Lafayette/Munster IN

Posts: 44

Likes: 0

Received 0 Likes on 0 Posts

1999 Chevy Camaro z28 M6

Year: 1999
Make: Chevrolet
Model: Camaro
Price: $8500
Mileage: 112500
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive

Selling my 1999 Camaro z28 Navy Blue Metallic with manual transmission. Car has 112,500 miles, been stored the last 4 winters inside, before that it was stored out side under covered parking. Car is a great driver with tasteful mods done. Car drives like it's on rails with the suspension work done. Has upgraded stereo and speakers all around, no sub taking up room or adding weight (factory has 2 8" woofers in the rear seat side panels so I upgraded them)

Car has the factory ground effects package which gives the car a great look and is hard to find in this color. Paint has a few nicks on the front of the hood, and there is a small tear on the drivers seat bottom cushion.

Car runs and drives great, tires have about 75% tread left and the brakes were just changed. Comes with full service history since I owned the car. Perfect car for a weekend cruiser, auto-x, corner carver, or a great starting point for a drag or higher HP build.

Pictures: http://1drv.ms/1KzgHaj

Modifications done:
Dyno tune from Mike Norris Motorsports in Indianapolis (333whp & 344 ft.lbs Wheel numbers!)
MGW short throw shifter
Harlan Shift light in center air vent
SLP replacement Shift ****
6000k HID (low beams and fog lights)
SLP chrome lug nut covers
Shorty antenna
Pioneer Double din head unit with bluetooth and DVD palyback
Upgraded Key Audio speaker package
Visor delete covers
Pacesetter 1-3/4" long tube headers
Pacesetter off-road 3" y-pipe
Hooker 3" cat-back exhaust
SLP intake lip
SLP smooth bellows
Passenger window fix
new window motors in both doors
EGR/AIR delete
UMI Supension (front & rear sway bars and end links, strut tower brace, weld-in 3 point subframe connectors, adjustable lower control arms, adjustable pan-hard rod, pan-hard rod relocation kit, lower control arm relocation brackets, adjustable torque-arm, torque-arm relocation kit, drive shaft safety loop)
Energy suspension motor and transmission mount
Turn-One Power Steering Pump and Pulley
Stainless Braided Brake Lines
Newer pads all around (no fade great bite on pedal feel)
Newer Rotors all around

If interested or want to make a reasonable offer, please let me know. I have a build sheet and carfax available on request.

Attached Thumbnails