2000 Trans Am, M6,Blk on Blk, Cam only w/BUILT drive train.
11-26-2008, 07:34 AM
#1
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Dec 2003
Location: Huntsville, AL
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
2000 Trans Am, M6,Blk on Blk, Cam only w/BUILT drive train. SOLD
Selling my Baby becasue I bought a 06 Vette.
2000 Pontiac Trans Am Fully Loaded! The car does have an Alabama Rebuilt TITLE. Everythings works great! Dynoed at 406 rwhp! Car must go new baby in the garage! I have put a X1 cam (.591,.571 lift, 230, 227 duration at 112 degrees lobe separation) in with manley valve springs, retainers, and push rods. It has hooker long tube headers, Texas Speed True duals (with turndowns). It has an LS6 Intake, and a ported and polished Throttle body. The clutch is a SPEC stage 3 (x pad). A SPEC billet aluminum flywheel as well. The hydraulics were upgraded to handle this clutch. The shifter is a stock Hurst with a Lou’s short stick. I have a Harlan shift light in the driver side defrost vent(red LED), and a Harlan Two-Step (a studer box). I replaced the aluminum drive shaft with a custom made raceing one made from 95/1000 inch steel with over sized u-joints. The rear end is bullit proof, it ghs a Moser Ford 9" with Moser axels (31 spline), Detroit Locker, and a 4.11 gear. The car has lower control arms, relocating brackets, Competition Engineering subframe connectors, and polly transmission and torque arm mounts. The torque arm was also enclosed in steel to prevent flexing and wheel hop during hard acceleration, it also has a drive shaft loop. The car has Torque Thrust II's Wheels(American Racing). The hood is a Suncoast Creations Raptor hood, with their matching air box. The car has monsoon stereo system plus a Kicker Solobaric L7 (square) 10" customly built in rear corner panel and a Pioneer amp. Car is in great condition but was daily driver so some light scratches here and there. Car get 24mpg on the high way, and runs 7.5 in the 1/8th Feel free to e-mail me for any questions or additional info. harley_hunt@yahoo.com or call me 256-509-1818
$9000 OBO
It is on ebay as well, call me if you are intrested. 256-509-1818
http://cgi.ebay.com/ebaymotors/Ponti...fCarsQ5fTrucks
Selling my Baby becasue I bought a 06 Vette.
2000 Pontiac Trans Am Fully Loaded! The car does have an Alabama Rebuilt TITLE. Everythings works great! Dynoed at 406 rwhp! Car must go new baby in the garage! I have put a X1 cam (.591,.571 lift, 230, 227 duration at 112 degrees lobe separation) in with manley valve springs, retainers, and push rods. It has hooker long tube headers, Texas Speed True duals (with turndowns). It has an LS6 Intake, and a ported and polished Throttle body. The clutch is a SPEC stage 3 (x pad). A SPEC billet aluminum flywheel as well. The hydraulics were upgraded to handle this clutch. The shifter is a stock Hurst with a Lou’s short stick. I have a Harlan shift light in the driver side defrost vent(red LED), and a Harlan Two-Step (a studer box). I replaced the aluminum drive shaft with a custom made raceing one made from 95/1000 inch steel with over sized u-joints. The rear end is bullit proof, it ghs a Moser Ford 9" with Moser axels (31 spline), Detroit Locker, and a 4.11 gear. The car has lower control arms, relocating brackets, Competition Engineering subframe connectors, and polly transmission and torque arm mounts. The torque arm was also enclosed in steel to prevent flexing and wheel hop during hard acceleration, it also has a drive shaft loop. The car has Torque Thrust II's Wheels(American Racing). The hood is a Suncoast Creations Raptor hood, with their matching air box. The car has monsoon stereo system plus a Kicker Solobaric L7 (square) 10" customly built in rear corner panel and a Pioneer amp. Car is in great condition but was daily driver so some light scratches here and there. Car get 24mpg on the high way, and runs 7.5 in the 1/8th Feel free to e-mail me for any questions or additional info. harley_hunt@yahoo.com or call me 256-509-1818
$9000 OBO
It is on ebay as well, call me if you are intrested. 256-509-1818
http://cgi.ebay.com/ebaymotors/Ponti...fCarsQ5fTrucks
Last edited by pontiac; 12-06-2008 at 09:01 AM.
11-29-2008, 10:09 AM
#4
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Dec 2003
Location: Huntsville, AL
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
To low, thanks though. I know the rebuilt title scares some, I got the car when it was 1/2 year old (8000 miles) becasue someone at a dealership messed up the front end, fenders,hood, bumper cover. no holes slotted, or over spray. just bolted new body parts up. and had it inspected. car has been paid off for along time, would not sell for thaqt cheap
