Mustang with carbed ls1 and nitrous
03-11-2009, 07:51 PM
#1
Teching In
Thread Starter
Join Date: Jul 2007
Location: Chicago
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Mustang with carbed ls1 and nitrous Just trying to see if there is any interest in my Mustang with a LS1 swap.
I just don't have time to play with this right now so I thought I would offer it up. The car was just finished but still needs minor adjustments to the carb to make it perfect. Car was in minor accident. There is no damage from the accident to the car from the strut towers back. Just a little wrinkling by the battery and air box sheet metal.
Car is a hatchback with grey interior (black carpet and front seats) and no rear seat. Here is some of what is in it.
AJE K-member
AJE controll arms
qa1 coil over
HPI caster cambre plates
lakewood 90/10 struts
aluminum radiator
electric fan
8.8 rear with 4:30 gear
strange spool 33 spline
strange axles 33 spline
chrome moly drive shaft
solid u-joints
upr adjustable upper contol arms
spherical upper bushings
trz lower control arms
th400 trans with brake
-6 trans lines
big trans cooler
3600 stall
deep aluminum trans pan
manual valve body
hurst quarter stick shifter and custom mount
autometer guages
cervini fiberglass hood
msd carbed control box
edlebrok carbed intake
demon carb
918 springs
msd wires
ngk plugs
tci sfi flexplate
comp push rods
1.8 roller rockers
2000 5.7 ls1 engine
2 1/2 inch exhaust with mac mufflers
6.0 exhaust manifolds
16 gallon fuel cell
battery relocation kit
Holley blue fuel pump for nitrous
-8 fuel line for nitrous
Aeromotive a1000 and carbed regulator for engine
-10 to regulator
-8 return
NOS big shot plate kit
The car has a 8 point roll bar with the upper and lower torque boxes all welded and has been frame tied. The car runs and drives. It sounds like a stock mustang 5.0 until you hit it! And it has heat! No wipers but they could be installed if wanted.
All parts have about 2.5 (if that) miles on them, except engine had 30,000 on it when bought, and the A1000 came off my mustang.
I have over 14000 in parts on the car. Any serious offer considered.
Here is a link to some pictures
http://www.flickr.com/photos/2912655...7606862818559/
I'm not on here a lot so please call or email me!!!!
Any questions please call 708-837-7815 or email me at motionphaseiii@yahoo.com
I just don't have time to play with this right now so I thought I would offer it up. The car was just finished but still needs minor adjustments to the carb to make it perfect. Car was in minor accident. There is no damage from the accident to the car from the strut towers back. Just a little wrinkling by the battery and air box sheet metal.
Car is a hatchback with grey interior (black carpet and front seats) and no rear seat. Here is some of what is in it.
AJE K-member
AJE controll arms
qa1 coil over
HPI caster cambre plates
lakewood 90/10 struts
aluminum radiator
electric fan
8.8 rear with 4:30 gear
strange spool 33 spline
strange axles 33 spline
chrome moly drive shaft
solid u-joints
upr adjustable upper contol arms
spherical upper bushings
trz lower control arms
th400 trans with brake
-6 trans lines
big trans cooler
3600 stall
deep aluminum trans pan
manual valve body
hurst quarter stick shifter and custom mount
autometer guages
cervini fiberglass hood
msd carbed control box
edlebrok carbed intake
demon carb
918 springs
msd wires
ngk plugs
tci sfi flexplate
comp push rods
1.8 roller rockers
2000 5.7 ls1 engine
2 1/2 inch exhaust with mac mufflers
6.0 exhaust manifolds
16 gallon fuel cell
battery relocation kit
Holley blue fuel pump for nitrous
-8 fuel line for nitrous
Aeromotive a1000 and carbed regulator for engine
-10 to regulator
-8 return
NOS big shot plate kit
The car has a 8 point roll bar with the upper and lower torque boxes all welded and has been frame tied. The car runs and drives. It sounds like a stock mustang 5.0 until you hit it! And it has heat! No wipers but they could be installed if wanted.
All parts have about 2.5 (if that) miles on them, except engine had 30,000 on it when bought, and the A1000 came off my mustang.
I have over 14000 in parts on the car. Any serious offer considered.
Here is a link to some pictures
http://www.flickr.com/photos/2912655...7606862818559/
I'm not on here a lot so please call or email me!!!!
Any questions please call 708-837-7815 or email me at motionphaseiii@yahoo.com
