99 z28 f1a procharged, custom paint
09-10-2009, 09:09 AM
#1
99 z28 f1a procharged, custom paint, price reduced! 408 CI LQ9 block
callies dragonslayer crank
compstar rods
ARP main studs
weisco pistons (9.48/1 comp)
ETP 245 heads with ARP studs
EPP blower cam
F1A procharger
Front mount intercooler
SDCE belt tensioner
katech adjustable serpentine belt tensioner
Procharger (red) race bypass valve
pacesetter headers with flowmaster exhaust( I have a full SLP exhaust system also, i like this one because its quieter)
754/685 RWHP/TQ @13 psi. (very conservitive for this blower)
methenol injection
nasty performance fuel system
60lbs injectors
4L65 Trans built by CPT transmissions
hardened input and output shaft (have to find my build sheet for more info)
vigilante triple disk convertor (3200 stall)
PST 3.5 in. aluminum driveshaft (10 year guarentee)
moser 9in. rear with aluminum center section
full spool
3.70 rear
all black interior with TA door panels
interior has new carpet
power seats out of a 02 TA
triple gage pod with wide band/ fuel pressure/ boost
full stereo system with infinity speakers/2 10in. subs and 2 rockford amps
slp line locks
ABS elimination kit
corvette c6 wheels 275/40/17 fronts 335/30/18 hoosier drag radials in rear
cross drilled and slotted rotors
powdercoated calipers
body mounted torque arm relocation bracket
SLP torque arm
custom paint,luxo blue off 06 corvette, stripes are silver(they look white in pics sometimes)
The car has about 37000mi. on it, i havent turned 2000mi. on the build yet.
http://i252.photobucket.com/albums/h...5/IMG_1295.jpg
http://i252.photobucket.com/albums/h...5/102_0360.jpg
23,000 B.O.
will consider trade for c6 vette
callies dragonslayer crank
compstar rods
ARP main studs
weisco pistons (9.48/1 comp)
ETP 245 heads with ARP studs
EPP blower cam
F1A procharger
Front mount intercooler
SDCE belt tensioner
katech adjustable serpentine belt tensioner
Procharger (red) race bypass valve
pacesetter headers with flowmaster exhaust( I have a full SLP exhaust system also, i like this one because its quieter)
754/685 RWHP/TQ @13 psi. (very conservitive for this blower)
methenol injection
nasty performance fuel system
60lbs injectors
4L65 Trans built by CPT transmissions
hardened input and output shaft (have to find my build sheet for more info)
vigilante triple disk convertor (3200 stall)
PST 3.5 in. aluminum driveshaft (10 year guarentee)
moser 9in. rear with aluminum center section
full spool
3.70 rear
all black interior with TA door panels
interior has new carpet
power seats out of a 02 TA
triple gage pod with wide band/ fuel pressure/ boost
full stereo system with infinity speakers/2 10in. subs and 2 rockford amps
slp line locks
ABS elimination kit
corvette c6 wheels 275/40/17 fronts 335/30/18 hoosier drag radials in rear
cross drilled and slotted rotors
powdercoated calipers
body mounted torque arm relocation bracket
SLP torque arm
custom paint,luxo blue off 06 corvette, stripes are silver(they look white in pics sometimes)
The car has about 37000mi. on it, i havent turned 2000mi. on the build yet.
http://i252.photobucket.com/albums/h...5/IMG_1295.jpg
http://i252.photobucket.com/albums/h...5/102_0360.jpg
23,000 B.O.
will consider trade for c6 vette
Last edited by lmt0705; 09-16-2009 at 11:23 AM.
