Vehicles For Sale - LSX Powered ONLY ONLY LSX POWERED VEHICLES - NO TRADES UNLESS YOUR VEHICLE IS LSX POWERED!!!!!!

2000 Camaro SS Build # 4040.

 
Thread Tools
 
Search this Thread
 
Old 10-13-2009 | 11:34 AM
  #1  
blown 346's Avatar
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: Jan 2003
Posts: 1,427
Likes: 0
From: Loves park/rockford
Default 2000 Camaro SS Build # 4040.

I might have to sell my car, I havent been able to find work. The car is going to have to find a new owner.

The car has tons of mods, I will list the most important. If anyone is serious They can call me at the number below for more information on the car. The car would sell with every single reciept. There is a little over $30K in the car with everything. There was no expoense spared in the build, the car can be driven anywhere, around town all day.

Mileage is at 56,000

Body

New paint. All new badges BSM have been removed.
Custom flared rear quarter panels (no filler or weld on flares etc. Original metal)
Custom ZL1 hood (hood weighs less than 12LBS)
Had the front clip holes filled in smooth and custom painted CAMARO letters in front and back.
FIKSE custom Forged wheels
17X9.5 up front 17X11 in the rear.

Suspension

BMR LCA's
BMR ADJ. Panhard bar
Tubular Chromoly ProFab K member
Tubular Chromoly Pro Fab A Arms With Spherical rod ends
Tubular Chromoly Pro Fab Lower control arms with Spherical rod ends
BMR Weld in SFC's
QA1 shocks front to back

Motor

Stock Bottom end
Comp cams Camshaft 222/222 Dur 563/563 Lift on a 114
Comp Cams Pushrods stock length
Comp Cams Springs
SLP Long Tube Headers
SLP Loudmouth Catback
Hi Flow Cats
P1SC Procharger On 10PSI with all brand new pullies and bearings
ATI Fan
SLP Fan Switch
SLP large Capacity Radiator
160 Stat
Custom 3" Hardpiping
Turbonetics BlowOff Valve
LS6 Intake
BBK Throttle Body
Granatelli MAF
K Tech Tensioner
Hotchkis Strut Tower Brace
The car made 493 RWHP on 6 PSI and the stock rubber hoses that came with the kit, stock intake,throttle body, MAF.
Thunder racing billet engine bay caps
SLP High flow Radiator
ARP Rod Bolts
Crank pinning kit, pinned 3 times. The balancer sheared off the first pin, so we pinned it 3 times with no issues.
Fuel System

340 Intake Pump
255 Inline
42 LB Injectors
High Flow Polished Fuel rail with Braided line

Transmission

Stage 3 4L60E
3800 TCI convertor
Perma cool Trans cooler with 1200 CFM fan and braided line

Interior

Stock Leather Out of 10 I would give it a 9
Tinted glass front to back
3 gauge pillar
Autometer guages
Oil Pressure'
Boost/Vac
Fuel Pressure
A/F guage near radio
Trans Temp in Cup Holder
Alpine CD player
2 12" Audiobahn subs with box
JL Audio Mono Block Amp 500X1 for the subs.
Boston Pro Front and rear speakers
Alpine V12 Amp for interior Speakers

From the factory
SS Floor Mats
SS Dash Plague
Camaro SS Key Fob
Original Window sticker and car order information
12 Disc CD Changer


The only issue with the car is the trans. The car will move and drive but only for about 20 seconds before the trans goes into nuetral in all gears minus Park. You shut the car off and re start it and the trans will engage and then go back into nuetral. The car does need a tune since I added more boost, hardpiping, throttle body, intake,

I have owned the car since new, I ordered it back in Nov of 99 and took delivery of it Feb 4 2000 with 14 Miles on the clock. The car should be making a little more then 600 RWHP with no tune.

Im sure there is more Im missing. If interested call 847-489-1982


$15,000








Last edited by blown 346; 10-28-2009 at 08:11 PM.
Old 10-28-2009 | 08:05 PM
  #2  
blown 346's Avatar
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: Jan 2003
Posts: 1,427
Likes: 0
From: Loves park/rockford
Default







Old 10-28-2009 | 08:05 PM
  #3  
blown 346's Avatar
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: Jan 2003
Posts: 1,427
Likes: 0
From: Loves park/rockford
Default








 



Quick Reply: 2000 Camaro SS Build # 4040.



All times are GMT -5. The time now is 01:40 AM.