1986 Mazda Rx7 Setup For SBC/T56 - Fully Forged 355 Included Built For Boost (800+HP)
05-08-2005, 10:25 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2004
Location: Waterloo Iowa
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
1986 Mazda Rx7 Setup For SBC/T56 - Fully Forged 355 Included Built For Boost (800+HP) FOR SALE:
1986 Mazda Rx7 GXL - Red In Color
I Wanna Say The Rear Is A Turbo II 4.10 POSI - Will Double Check
Power Windows/Doors
Power Moonroof
Electronic Ajustable Suspension
Granny's Speed Shop SBC Engine Cradle And T-56 Driveshaft - Still Installed
Car's Hood Has Hole Cut In It For Air Filter
Car Could Use MISC TLC And Cleanup To Make Perfect
Clean Title
Included In The Sale -
1977 SBC 355 - 4 Bolt Main
Wiseco Forged Pistons - 8:5-1 Compression
Eagle 4340 Forged H-Beam Rods
Eagle 4340 Forged Crank
ARP Bolts All Through The Motor
Worked GM "487" Heads 2.02/1.60
Crane 1.6 Full Roller Rockers
Chrome Dress Up Kit
Way To Much To List - Engine Has Less Than 5 Miles On It
Engine Was Built To Handle 900+ Boosted Horsepower
This Is A Bad-*** Nearly Bullet Proof Motor
Motor Itself Has 350HP/400TQ
Picture Shows Engine Installed - Engine Is Currently On A Stand
Engine Needs Intake/Carb/Distrib To Run.
Over $4000 In Receipts For Engine Alone
Car Is Prolly Worth $500-600 To Me
Cradle And Custom T-56 Driveshaft Were $600+
I'm Asking $2250 For Everything Or Will Split Up
Chris James
Any Questions Dont Hesitate To E-mail Me Or Leave A Post
NitrousJunkie427@wmconnect.com
1986 Mazda Rx7 GXL - Red In Color
I Wanna Say The Rear Is A Turbo II 4.10 POSI - Will Double Check
Power Windows/Doors
Power Moonroof
Electronic Ajustable Suspension
Granny's Speed Shop SBC Engine Cradle And T-56 Driveshaft - Still Installed
Car's Hood Has Hole Cut In It For Air Filter
Car Could Use MISC TLC And Cleanup To Make Perfect
Clean Title
Included In The Sale -
1977 SBC 355 - 4 Bolt Main
Wiseco Forged Pistons - 8:5-1 Compression
Eagle 4340 Forged H-Beam Rods
Eagle 4340 Forged Crank
ARP Bolts All Through The Motor
Worked GM "487" Heads 2.02/1.60
Crane 1.6 Full Roller Rockers
Chrome Dress Up Kit
Way To Much To List - Engine Has Less Than 5 Miles On It
Engine Was Built To Handle 900+ Boosted Horsepower
This Is A Bad-*** Nearly Bullet Proof Motor
Motor Itself Has 350HP/400TQ
Picture Shows Engine Installed - Engine Is Currently On A Stand
Engine Needs Intake/Carb/Distrib To Run.
Over $4000 In Receipts For Engine Alone
Car Is Prolly Worth $500-600 To Me
Cradle And Custom T-56 Driveshaft Were $600+
I'm Asking $2250 For Everything Or Will Split Up
Chris James
Any Questions Dont Hesitate To E-mail Me Or Leave A Post
NitrousJunkie427@wmconnect.com
Last edited by NitrousJunkie; 06-20-2005 at 10:03 AM.
06-20-2005, 10:01 AM
#2
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2004
Location: Waterloo Iowa
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
NEW PRICE - $2250 - Must Sell To Start New Project
Driveshaft will work with either T-56 Or TH350
I know where there is a rebuilt 9" Tail TH350 that will fit for $75 Extra
Car needs a little interior tlc, nothing major and the body is basicly rust free besides a small amount of surface starting on the left rear 1/4, pretty minor.
Will Seperate Car And Engine - Make Offers.
Have More Pics Of Car And Engine E-mail Me For Them - Thanks.
Chris
NitrousJunkie427@wmconnect.com
Driveshaft will work with either T-56 Or TH350
I know where there is a rebuilt 9" Tail TH350 that will fit for $75 Extra
Car needs a little interior tlc, nothing major and the body is basicly rust free besides a small amount of surface starting on the left rear 1/4, pretty minor.
Will Seperate Car And Engine - Make Offers.
Have More Pics Of Car And Engine E-mail Me For Them - Thanks.
Chris
NitrousJunkie427@wmconnect.com
