1997 Camaro Z28 Fully Setup Rolling Chassis - Certified to 7.50ET
#1
Launching!
Thread Starter
Join Date: Jan 2004
Location: Clearwater, FL
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SOLD
$12,500 FIRM or Consider Trade(Must be turnkey) Bikes, hotrods, boats, LS1's, what do you have?
1997 Camaro Z28 Stock Style Suspension Racecar
LS1Tech Racing Series Legal
Chassis:
- Custom Brad Hadman Progressive Metal Craft ChromeMoly Rollcage Certified to 7.50 till 2/2006
- Cage Goes Through the Firewall, Through the Shock Towers and up to the Frame Horns
- PA Racing ChromeMoly K-Member
- PA Racing ChromeMoly A-Arms
- Tubular ChromeMoly Sub Frame Connectors w/ Additional Boxed Bracing to Inner Pan
- (New) Pinto Style Manual Steering Rack w/ adjustable Bump Steer Ends
- Quick Release Sparco Steering wheel w/ custom Momo hub
- Glasstek Dzus Fastened 4" Cowl Hood, Painted to match the car
- (New in box) Ed Quay Sheet Metal Pro Strut Wing
- Cowl is cut and molded to Firewall
- All Engine Bay Holes filled, Engine Bay Painted Gloss White like Rest of Car
- Heater/AC hole in firewall Covered/ Welded/ Painted to be One Piece w/ Firewall
- (New) 2 Sparco Racing Seats, with Sliding Brackets
- Stroud Parachute w/ Removable Parachute Mount
- (New) Stroud Parachute Release Cable
- (New) Aerospace Drag Brakes on All 4 Corners
- Converted to Manual Brakes
- (New) Wilwood Manual Master Cylinder
- Solid Tubular ChromeMoly Motor Mounts for LT1/SBC/BBC
Suspension:
- Wolfe Racecraft ChromeMoly Torque Arm
- Wolfe Racecraft Solid Anti-Roll Bar
- Custom 76" Pro Stock Type Wheelie Bars (Powdercoated Black)
- Custom Easy Adjustment Spohn ChromeMoly Spherical-Rod End Lower Control Arms
- (New) ChromeMoly Rod End Adjustable Pan Hard Rod
- (New) QA1 Coilover Front Shock/Spring Package
- (New) QA1 Rear Shocks
- OEM Z28 Convertible Rear Springs
Rear-end:
- Custom Narrowed 9" Rear-end
- (New) Strange Ultra Case w/ a 3.250" pinion bore and a 35 spline aluminum spool and 12 bolt pinion support.
- Lamb style racing flanges.
- (New) 3.89:1 Ring and Pinion Set / 9310 Steel
- (New) Strange Aluminum Spool and 12 Bolt Pinion Support
- (New) Moser Gundrilled and Flange Lightened 35 Spline Axles
- (New) Aluminum 35 Spline Strange Spool
- Entire Rear End Powder Coated Black
Electrical:
- (New in box) Painless Wiring 12 Circuit Streetcar/Drag Race Wiring Harness -
- (New) Autometer 2 5/8" Ultra Lite Aluminum Gauges (Oil Psi, Water Temp, and Voltage) –
- Gauges Mounted in Factory Location in Custom Carbon fiber Panel, Behind Factory Glass
- (New) Rear Mounted Aluminum Sealed Battery Box
- (New) Flaming River Push Off Battery Master Switch
Fuel System:
- (New) Charged Air Systems Fabricated Aluminum Fuel Tank w/ Rear Sump
- (New) Aeromotive Billet Filters Pre-Pump and After Pump
- (New) Product Engineering Y-Block
Exterior is White – Chassis Only Has 24k Miles
Currently on 3rd Gen WS6 wheels and tires
Alumastars/MT's do not come with the car
Complete Body
Car will be without Motor or Transmission
Paint is in Excellent Shape.
T-Tops
Tinted Windows
Interior is Charcoal Gray – Complete except Carpet and Headliner
Original Hound’s-Tooth Rear Seats Included
M6 Console
Many more parts new in the box. Too many too list.
$12,500 FIRM or Consider Trade(Must be turnkey) Bikes, hotrods, boats, LS1's, what do you have?
$12,500 FIRM or Consider Trade(Must be turnkey) Bikes, hotrods, boats, LS1's, what do you have?
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
1997 Camaro Z28 Stock Style Suspension Racecar
LS1Tech Racing Series Legal
![](http://i5.photobucket.com/albums/y197/fastta/drivers_side.jpg)
Chassis:
- Custom Brad Hadman Progressive Metal Craft ChromeMoly Rollcage Certified to 7.50 till 2/2006
- Cage Goes Through the Firewall, Through the Shock Towers and up to the Frame Horns
- PA Racing ChromeMoly K-Member
- PA Racing ChromeMoly A-Arms
- Tubular ChromeMoly Sub Frame Connectors w/ Additional Boxed Bracing to Inner Pan
- (New) Pinto Style Manual Steering Rack w/ adjustable Bump Steer Ends
- Quick Release Sparco Steering wheel w/ custom Momo hub
- Glasstek Dzus Fastened 4" Cowl Hood, Painted to match the car
- (New in box) Ed Quay Sheet Metal Pro Strut Wing
- Cowl is cut and molded to Firewall
- All Engine Bay Holes filled, Engine Bay Painted Gloss White like Rest of Car
- Heater/AC hole in firewall Covered/ Welded/ Painted to be One Piece w/ Firewall
- (New) 2 Sparco Racing Seats, with Sliding Brackets
- Stroud Parachute w/ Removable Parachute Mount
- (New) Stroud Parachute Release Cable
- (New) Aerospace Drag Brakes on All 4 Corners
- Converted to Manual Brakes
- (New) Wilwood Manual Master Cylinder
- Solid Tubular ChromeMoly Motor Mounts for LT1/SBC/BBC
Suspension:
- Wolfe Racecraft ChromeMoly Torque Arm
- Wolfe Racecraft Solid Anti-Roll Bar
- Custom 76" Pro Stock Type Wheelie Bars (Powdercoated Black)
- Custom Easy Adjustment Spohn ChromeMoly Spherical-Rod End Lower Control Arms
- (New) ChromeMoly Rod End Adjustable Pan Hard Rod
- (New) QA1 Coilover Front Shock/Spring Package
- (New) QA1 Rear Shocks
- OEM Z28 Convertible Rear Springs
Rear-end:
- Custom Narrowed 9" Rear-end
- (New) Strange Ultra Case w/ a 3.250" pinion bore and a 35 spline aluminum spool and 12 bolt pinion support.
- Lamb style racing flanges.
- (New) 3.89:1 Ring and Pinion Set / 9310 Steel
- (New) Strange Aluminum Spool and 12 Bolt Pinion Support
- (New) Moser Gundrilled and Flange Lightened 35 Spline Axles
- (New) Aluminum 35 Spline Strange Spool
- Entire Rear End Powder Coated Black
Electrical:
- (New in box) Painless Wiring 12 Circuit Streetcar/Drag Race Wiring Harness -
- (New) Autometer 2 5/8" Ultra Lite Aluminum Gauges (Oil Psi, Water Temp, and Voltage) –
- Gauges Mounted in Factory Location in Custom Carbon fiber Panel, Behind Factory Glass
- (New) Rear Mounted Aluminum Sealed Battery Box
- (New) Flaming River Push Off Battery Master Switch
Fuel System:
- (New) Charged Air Systems Fabricated Aluminum Fuel Tank w/ Rear Sump
- (New) Aeromotive Billet Filters Pre-Pump and After Pump
- (New) Product Engineering Y-Block
Exterior is White – Chassis Only Has 24k Miles
Currently on 3rd Gen WS6 wheels and tires
Alumastars/MT's do not come with the car
Complete Body
Car will be without Motor or Transmission
Paint is in Excellent Shape.
T-Tops
Tinted Windows
Interior is Charcoal Gray – Complete except Carpet and Headliner
Original Hound’s-Tooth Rear Seats Included
M6 Console
Many more parts new in the box. Too many too list.
$12,500 FIRM or Consider Trade(Must be turnkey) Bikes, hotrods, boats, LS1's, what do you have?
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Last edited by fastta; 07-05-2005 at 05:03 PM.
#6
9 Second Club
iTrader: (119)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
curious........is there anything you would sell the car without? i have most of the items you've already listed, but am considering another car to do. or, i can't do 12,500, but i can do cash and a bunch of high dollar misc parts if you're interested. just a thought. let me know. how about some pics too?
thanks,
Dave
thanks,
Dave