91 Z28 Drag Car
06-14-2006, 12:00 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Location: Greenville, SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
91 Z28 Drag Car Hey guys, i've got a 91 Z28 hard top car that is pretty much set up to run. It has a 6 or 8 pt rollcage (not sure which.) It's got blue racing seats. switch panel, tach, momo steering wheel. Battery has been relocated to the rear with cut off switch. The car has spent the last 2-3 years in a garage. Has been run a total of maybe 3 miles, and before i had it maybe a total of 10 miles. It also has a 4in fiberglass cowl hood.
Body has seen 135,000 miles.
It has a 355. with trp forged pistons, 260/260 cam. Crane 1.6 roller rockers. Performer RPM heads, MSD digital 6, blaster coil.
Transmission is a th350 with 3000 b&m torque conveter. Car is very clean and in very good shape for age.
The bad. The car does not run. It needs a carburetor and a driveshaft.
6k OBO Save someoen that is looking to build a pure drag car a decent amount of money.
Pictures can be found here: http://community.webshots.com/album/168594645fQAWAm
Body has seen 135,000 miles.
It has a 355. with trp forged pistons, 260/260 cam. Crane 1.6 roller rockers. Performer RPM heads, MSD digital 6, blaster coil.
Transmission is a th350 with 3000 b&m torque conveter. Car is very clean and in very good shape for age.
The bad. The car does not run. It needs a carburetor and a driveshaft.
6k OBO Save someoen that is looking to build a pure drag car a decent amount of money.
Pictures can be found here: http://community.webshots.com/album/168594645fQAWAm
