1993 mazda rx7 fd ls1 project
09-11-2006, 07:34 AM
#1
Launching!
Thread Starter
iTrader: (49)
Join Date: Feb 2004
Location: Davenport, IA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
1993 mazda rx7 fd ls1 project Guys some serious **** hit the fan in the past few days of my life and now I am forced to make some life long changes so I must sell my whole fd project.
1993 rx7 fd (salvage title)
car was media blasted down to the bare bones metal and painted corvette silver
solid 8.8 axle conversion with 3.73's and a stock style posi
sportsman top gun four link (chromemoly) installed Needs some minor finishing after setting the car up with full weight.
Strange coil overs adjustable
s&w Racecars 10 point rollcage
kirkey race seats
6 point harness
automoter speedometer (digital)
Automoter oil and temp gauges
sumped factory gas tank
two aeromotive a1000 fuel pumps and two -8 lines running to the front for the fuel system.
aeromotive bypass regulator
Moddified subframe for ls1 installation and trans crossmember for t56
2004 6.0 with 4l60e transmssion (not front accessories)
ls6 intake manifold
modified factory 99 and up harness for installation.
set up wtih 15x10 prostars with 28x10.5 et drags
battery kill switch and cable relocation.
luntai 237/242 .595/.595 114 camshaft
comp 918 springs
thunder racing 7.4 pushrods
I am sure there is alot more I am missing or not rembering to list.
This car is still in a project status and needs finishing.
8500.00
I can get some more curent pics also.
http://www.members.aol.com/elecarndt/rx7/
I need money to pay some bills as I am recently seperated from my fiance and having a hard time and don't need a project anymore.
563-505-9180
Elec Arndt
Elecarndt@aol.com or just pm me this needs to go asap.
1993 rx7 fd (salvage title)
car was media blasted down to the bare bones metal and painted corvette silver
solid 8.8 axle conversion with 3.73's and a stock style posi
sportsman top gun four link (chromemoly) installed Needs some minor finishing after setting the car up with full weight.
Strange coil overs adjustable
s&w Racecars 10 point rollcage
kirkey race seats
6 point harness
automoter speedometer (digital)
Automoter oil and temp gauges
sumped factory gas tank
two aeromotive a1000 fuel pumps and two -8 lines running to the front for the fuel system.
aeromotive bypass regulator
Moddified subframe for ls1 installation and trans crossmember for t56
2004 6.0 with 4l60e transmssion (not front accessories)
ls6 intake manifold
modified factory 99 and up harness for installation.
set up wtih 15x10 prostars with 28x10.5 et drags
battery kill switch and cable relocation.
luntai 237/242 .595/.595 114 camshaft
comp 918 springs
thunder racing 7.4 pushrods
I am sure there is alot more I am missing or not rembering to list.
This car is still in a project status and needs finishing.
8500.00
I can get some more curent pics also.
http://www.members.aol.com/elecarndt/rx7/
I need money to pay some bills as I am recently seperated from my fiance and having a hard time and don't need a project anymore.
563-505-9180
Elec Arndt
Elecarndt@aol.com or just pm me this needs to go asap.
Last edited by Elec87; 09-11-2006 at 10:05 AM.
09-19-2006, 09:30 PM
#3
I would like some more recent pics. Send them to kickback2back@msn.com please. And What all is needed to finish her up? Where are you at in the process? What parts are needed.. etc etc
09-19-2006, 09:54 PM
#4
[QUOTE=Elec87]
563-505-9180
Elec Arndt
[QUOTE]
I would try the number...
Hope things work out guy, if I make it up that way soon I will give you a yell.... This was a killer project, was hoping to see it finished....
563-505-9180
Elec Arndt
[QUOTE]
I would try the number...
Hope things work out guy, if I make it up that way soon I will give you a yell.... This was a killer project, was hoping to see it finished....
