Built 1997 GT with 4v swap
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My hard work and pride of joy is for sale. Many hours of hard sweat and tears and even a divorce came of it (Half of the reason). I am going to take a very very big loss on this cause as some know parts do not come cheap at all.
Car has never had any power adder on it
Details:
1997 Mustang GT 73,000 current miles
Built 1998 DOHC 4V
Eagle Rods 3 passes
Coast High performance flat top pistons (10.5:1 compression) 3 passes
Mod Max Plasma moly Rings file to fit (set up for nitrous) 3 passes
Race Rod and main bearings (0 Miles)
New valve steam seals and 3 angle Valve job (0 Miles)
New Felpro gaskets through the whole motor. (0 Miles)
Canton 7qt main (0 Miles)
Canton windage tray (0 Miles)
Stock T-45 transmission (4k miles)
fiadaza flywheel (0 Miles)
Anderson Stage III Clutch (0 Miles)
B&M Ripper shifter (0 Miles)
UPR manual brake kit (0 Miles)
Full set of weld Prostars with new front and rear tires
QA1 Tubular K-member (0 Miles)
QA1 Tubular A-arms (0 Miles)
Flaming river manual river steering rack (0 Miles)
MMR front coilovers (0 Miles)
Lakewood 50/50 (2k miles)
Lakewood 90/10 (0 Miles)
Powder coating (timing cover, valve covers, and intake)
42lb injectors
C&L 86mm mass air meter
Hooker Long tubes jethot coated
3in Dr Gas off road X-pipe
FMS A/C Delete
Battery relocation Kit with sheet metel box
BBK Uppers and Lowers
UPR Clutch cable and adjustable kit
Triple Apillar Pod. Volt, temp, oil pressure
and a load of other stuff...
I will throw in every mustang part I have 4v and 2v..I have off road X-pipes and H-pipes for 2v's wire harness for 4v computers for 4v and 2v ....Alot of stuff I do not have time to sale.
Car will be up at Fatal Performance getting the little bugs worked out that I had with it, So if you want to come check the car out just get with Jon.
The T45 needs to be rebuilt but I can sell it with or without a rebuild. If you chose without rebuild I will still have Fatal Peformance to tune the car for you.
$8000.00 Firm with trans
$7500.00 Firm with current trans
Those that want to talk cash can reach me
aim insane351wstang
email: utradtech@yahoo.com
Cell 832-866-7406
Here is some pics of the building stages.
![](http://www.mustangmods.com/ims/u/2530/4897/65105.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65108.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65109.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65110.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65111.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65112.jpg)
![](http://www.mustangmods.com/data/2206/7058457733_468_1.jpg)
Car has never had any power adder on it
Details:
1997 Mustang GT 73,000 current miles
Built 1998 DOHC 4V
Eagle Rods 3 passes
Coast High performance flat top pistons (10.5:1 compression) 3 passes
Mod Max Plasma moly Rings file to fit (set up for nitrous) 3 passes
Race Rod and main bearings (0 Miles)
New valve steam seals and 3 angle Valve job (0 Miles)
New Felpro gaskets through the whole motor. (0 Miles)
Canton 7qt main (0 Miles)
Canton windage tray (0 Miles)
Stock T-45 transmission (4k miles)
fiadaza flywheel (0 Miles)
Anderson Stage III Clutch (0 Miles)
B&M Ripper shifter (0 Miles)
UPR manual brake kit (0 Miles)
Full set of weld Prostars with new front and rear tires
QA1 Tubular K-member (0 Miles)
QA1 Tubular A-arms (0 Miles)
Flaming river manual river steering rack (0 Miles)
MMR front coilovers (0 Miles)
Lakewood 50/50 (2k miles)
Lakewood 90/10 (0 Miles)
Powder coating (timing cover, valve covers, and intake)
42lb injectors
C&L 86mm mass air meter
Hooker Long tubes jethot coated
3in Dr Gas off road X-pipe
FMS A/C Delete
Battery relocation Kit with sheet metel box
BBK Uppers and Lowers
UPR Clutch cable and adjustable kit
Triple Apillar Pod. Volt, temp, oil pressure
and a load of other stuff...
I will throw in every mustang part I have 4v and 2v..I have off road X-pipes and H-pipes for 2v's wire harness for 4v computers for 4v and 2v ....Alot of stuff I do not have time to sale.
Car will be up at Fatal Performance getting the little bugs worked out that I had with it, So if you want to come check the car out just get with Jon.
The T45 needs to be rebuilt but I can sell it with or without a rebuild. If you chose without rebuild I will still have Fatal Peformance to tune the car for you.
$8000.00 Firm with trans
$7500.00 Firm with current trans
Those that want to talk cash can reach me
aim insane351wstang
email: utradtech@yahoo.com
Cell 832-866-7406
Here is some pics of the building stages.
![](http://www.mustangmods.com/ims/u/2530/4897/65105.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65108.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65109.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65110.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65111.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/65112.jpg)
![](http://www.mustangmods.com/data/2206/7058457733_468_1.jpg)
![](http://www.mustangmods.com/ims/u/2530/4897/129441.jpg)