2001 Baldwin Motion SS Camaro 1 of 1 GMMG Real heritage + magazine car
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://brphotrods.com/motion%20camaro.html
The Camaro is a one of a kind tribute that pays homage to the Baldwin style muscle car of the past created by BRP hotrods. The car has a custom one off paint job that is artic white with a 1970 Camaro style (Citrus Green) Baldwin motion stripe. This Camaro features some very rare GMMG prototype parts and is a featured car in this the 2007 May . issue of Camaro Performers (5 page spread on the car). The hood front spoiler and speedo cluster all are from a Prototype car that GMMG (who built the ZL-1’s, Dale Earnhart, the Fred Gibb and Dicky Harrell cars) who was planning to build as set of 4th gen Motion cars with the help of Joel Rosen himself. (aka Mr. Motion) the speedo cluster has also been signed by Mr. Motion. After the deal with GMMG and Joel Rosen fell through BRPhotrods acquired the parts and a one of a kind muscle rod was created. BRP has had several cars grace the cover of hotrod magazine including the Year one 1969 LS1 Camaro. Listed below are the modifications that bring this Camaro to super car status.
Engine
Comp cams (Push rods, timing chain)
Fast composite intake
Crane cams (600-lift LS cam and valve spring package)
BRP intake system
Curtisbilt shaft roller rockers
Custom tune for engine to take full advantage of all additions
Zex direct port injection nitrous system(100 shot most ever used)
Suspension
BRP five-point roll cage
BRP weld in sub frame connectors
BRP boxed lower control arms with polyurethane busing
Eibach Pro springs
LP Firehawk 17 wheels with Yokohama ES 100 275/40 ZR17
Stainless steel brake set 13 rotors 3 piston brakes with rear set powder coated white
Two rear ends one with 2:73 gears and one with 3:42 both complete with brakes.
Exhaust
Stainless works big long tube headers
2 ½ cambered pipes
real dual exhaust though one of a kind functional side pipes
Interior
Custom hounds tooth seats
5-point harness
Trans
TCI street fighter 3500 converter
during the Long Haul event this car has runs mid to high 11sec quarter miles with 1.5 sec 60 foot times and placed second at the Fastest ET event. Also it ran 166.9 mph clocked at the top speed challenge and one of the fasted laps at road Atlanta during the event.
This is a very rare and serious car this is not only a custom-built show car it’s a thoroughbred racer with a direct link to the Baldwin Motions that sell for hundreds of thousands of dollars. This is the only 4th gen ever to have a real link to Mr. Motion and GMMG.
Call for more info please only serious people this is the real deal and my personal car
Phil Brewer
www.BRPHotRods.com
The Camaro is a one of a kind tribute that pays homage to the Baldwin style muscle car of the past created by BRP hotrods. The car has a custom one off paint job that is artic white with a 1970 Camaro style (Citrus Green) Baldwin motion stripe. This Camaro features some very rare GMMG prototype parts and is a featured car in this the 2007 May . issue of Camaro Performers (5 page spread on the car). The hood front spoiler and speedo cluster all are from a Prototype car that GMMG (who built the ZL-1’s, Dale Earnhart, the Fred Gibb and Dicky Harrell cars) who was planning to build as set of 4th gen Motion cars with the help of Joel Rosen himself. (aka Mr. Motion) the speedo cluster has also been signed by Mr. Motion. After the deal with GMMG and Joel Rosen fell through BRPhotrods acquired the parts and a one of a kind muscle rod was created. BRP has had several cars grace the cover of hotrod magazine including the Year one 1969 LS1 Camaro. Listed below are the modifications that bring this Camaro to super car status.
Engine
Comp cams (Push rods, timing chain)
Fast composite intake
Crane cams (600-lift LS cam and valve spring package)
BRP intake system
Curtisbilt shaft roller rockers
Custom tune for engine to take full advantage of all additions
Zex direct port injection nitrous system(100 shot most ever used)
Suspension
BRP five-point roll cage
BRP weld in sub frame connectors
BRP boxed lower control arms with polyurethane busing
Eibach Pro springs
LP Firehawk 17 wheels with Yokohama ES 100 275/40 ZR17
Stainless steel brake set 13 rotors 3 piston brakes with rear set powder coated white
Two rear ends one with 2:73 gears and one with 3:42 both complete with brakes.
Exhaust
Stainless works big long tube headers
2 ½ cambered pipes
real dual exhaust though one of a kind functional side pipes
Interior
Custom hounds tooth seats
5-point harness
Trans
TCI street fighter 3500 converter
during the Long Haul event this car has runs mid to high 11sec quarter miles with 1.5 sec 60 foot times and placed second at the Fastest ET event. Also it ran 166.9 mph clocked at the top speed challenge and one of the fasted laps at road Atlanta during the event.
This is a very rare and serious car this is not only a custom-built show car it’s a thoroughbred racer with a direct link to the Baldwin Motions that sell for hundreds of thousands of dollars. This is the only 4th gen ever to have a real link to Mr. Motion and GMMG.
Call for more info please only serious people this is the real deal and my personal car
Phil Brewer
www.BRPHotRods.com
#2
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The car is currently listed at $32,500 and if you compare it to any GMMG car let alone a motion car you know this is a steal. Anyone who buys the car I want right of first refusal. Which basically means if you ever go to sell the car after it is purchased from me I want first chance to buy it back.
Phil
770-751-0687
Phil
770-751-0687