FS: 2000 Metallic Green 6spd Z28 FL
#1
12 Second Club
Thread Starter
iTrader: (33)
Join Date: Jan 2005
Location: winter springs, fl
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 2000 Metallic Green 6spd z28 for sale. I will be doing a lot more high way driving as i start my internships for school and need a more economical daily driver. The car has just over 80k miles and drives very nicely. It has a few small mods: Carbon Fiber lid, Magnaflow exhaust, STB, lca's and 2 pt. weld on sfc, 4.10 gears, short throw shifter. no codes, clean car fax, dash is not cracked and has new tires on the stock snowflakes. I will take pictures of the car tomorrow. I'm asking payoff of the loan on the car, not exactly sure of what it is, in between 7 and 8 thousand, so i will ask $8000
The bad:
-clutch makes noise at disengagement only when cold first two grabs, but after that it is fine, no problems grabbing, and shifts and holds fine. Car ran a 13.3@105 my first time out
-rear gears whine, doesnt bother me but backlash is probably not set correctly
-interior door panels are cracked and will need replacing.
-needs front speakers
-tint needs redoing
-a/c needs a recharge
-small paint chips and dings on hood and drivers side
--All small things easily replaced for a total of around 300 bucks to make perfect
I will get some pictures in the morning
The bad:
-clutch makes noise at disengagement only when cold first two grabs, but after that it is fine, no problems grabbing, and shifts and holds fine. Car ran a 13.3@105 my first time out
-rear gears whine, doesnt bother me but backlash is probably not set correctly
-interior door panels are cracked and will need replacing.
-needs front speakers
-tint needs redoing
-a/c needs a recharge
-small paint chips and dings on hood and drivers side
--All small things easily replaced for a total of around 300 bucks to make perfect
I will get some pictures in the morning