99 Camro Roller, 9 inch,tubular front,Cromoly Cage,ext
09-15-2008, 03:02 PM
#1
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
99 Camro Roller, 9 inch,tubular front,Cromoly Cage,ext OK heres the deal I bought another 99 camaro that had the burkhart fab 9 I wanted in the first place but had to buy the whole car to get it.
Roller complete for 6000 OBO will come with 99 camaro black but with blue hood(my stock one) windsheild is cracked(had small under the hood fire that cracked it Harness is all replaced just needs the winsheild).
wolf cromoly 6 point cage
1 Brand New Kirky seat
moser 9 inch 31 spline axles,detroit locker 4.11 gears,long studs(things is like new)
adj lower control arms(2 sets to choose from)
BMR torque arm(good one welded to subframe connectors with drive shaft loop)
Welded in sub frame connectors
All Autometer gauges speedo,tach,fuel,oil,water
set up for LS1 still all wiring in place and works
tubular k member
tubular a-arms
QA1 drag shocks just rebuilt for the front
Slotted rotors stock front brakes
Bogart front prostars with new brand new MT tires
BMR rear battery tray(with charging lugs)
Lightweight carpet
No Heat or A/C with burkhart fire wall plate
Grant wheel
Sub frame connectors
Adj pan hard bar
Comp shocks in the rear
Aftermarket overflow tank
May be other parts but this give you an idea. I might part the car so Ill take offers on the parts but I need 6000 out of the roller wether I part it or sell it complete. Theres alot of stuff for that price. PM me offers on what parts you want if you have stock replacements.
325 340 7794 is my #
Roller complete for 6000 OBO will come with 99 camaro black but with blue hood(my stock one) windsheild is cracked(had small under the hood fire that cracked it Harness is all replaced just needs the winsheild).
wolf cromoly 6 point cage
1 Brand New Kirky seat
moser 9 inch 31 spline axles,detroit locker 4.11 gears,long studs(things is like new)
adj lower control arms(2 sets to choose from)
BMR torque arm(good one welded to subframe connectors with drive shaft loop)
Welded in sub frame connectors
All Autometer gauges speedo,tach,fuel,oil,water
set up for LS1 still all wiring in place and works
tubular k member
tubular a-arms
QA1 drag shocks just rebuilt for the front
Slotted rotors stock front brakes
Bogart front prostars with new brand new MT tires
BMR rear battery tray(with charging lugs)
Lightweight carpet
No Heat or A/C with burkhart fire wall plate
Grant wheel
Sub frame connectors
Adj pan hard bar
Comp shocks in the rear
Aftermarket overflow tank
May be other parts but this give you an idea. I might part the car so Ill take offers on the parts but I need 6000 out of the roller wether I part it or sell it complete. Theres alot of stuff for that price. PM me offers on what parts you want if you have stock replacements.
325 340 7794 is my #
09-15-2008, 08:38 PM
#5
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Thanks and I hope so I need it gone to finish the the other one I got. With the parts Its got and the shape there in I think it should be a great start or Im going to part it but I hate to do that with this car.
Trending Topics
09-16-2008, 02:54 PM
#8
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
If I took the rear out I would need something to put in it to roll around so the rear would have to be a local sale with there stock rear also. I would still want the 1800 I just paid for it though. It is like new with new detroit locker and 4.11 pro gear.
I would take 2k for it with the adj lowers and pan hard bar if it was a local sale.
09-17-2008, 10:25 PM
#13
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Ive had alot of trade offers on this and other sites. I will say the ONLY thing I would trade for is a built power glide with trans brake after market case and bell housing for SBC or a F1 or F2 complete procharger in GREAT shape for SBC.
09-18-2008, 10:05 AM
#14
TECH Addict
iTrader: (75)
Join Date: Apr 2005
Location: Rock Hill, South Carolina
Posts: 2,578
Likes: 0
Received 0 Likes
on
0 Posts
i have a 50,000 mile 3 channel 10 bolt out of my 02 SS stock 3.42 gear bearings have been replaced. how much cash would you be wanting with the trade?
09-18-2008, 10:24 AM
#15
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I would need 1800 and your stock rear but shipping would be alot thats why I think it would have to be a local deal if i were to sell just the rear and half the reason Im trying to keep the car all together.
09-18-2008, 01:55 PM
#16
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
1 week offer before I start to part it out 5k for everything NO LESS NO BS...I dont think you can find one with more for this price but I need the space and it gone. Dont ask, I will not take a penny less Ill start to part it out before I take lees than 5k.
325 340 7794
325 340 7794
09-19-2008, 04:16 PM
#20
Teching In
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Jacksonville NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Well I really hope I sell it together or it will hit the junk yard after I strip it. I dont have a choice Im moving to NC and then headed out to IRAQ for a 4th tour so I cant take both of them.