2005 SRT-10 Dodge Ram Viper Run and Drive Rebuildable/Donor!
11-24-2008, 03:59 PM
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Columbia Station, OH
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2005 SRT-10 Dodge Ram Viper Run and Drive Rebuildable/Donor! Hey guys, We are new here on LS1Tech.com but plenty of you know who we are! We are a Late Model High Performance salvage yard based out of Cleveland Ohio. We will be offering many rebuildable cars, engine dropouts, body panels, interior parts, and modifications for your LSX cars as well as Fords Dodge and basically anything Domestic so keep track of our posts!
This is an amazing opportunity that may never come up again. The truck is a fully functional run and drive vehicle! The truck, starts, runs, stops, and is a fully functional donor for your hot rod application.The cooling is 100 percent functional, along with the complete dash and gauges! This would be a great truck for a full frame donor for your older street rod or full frame truck. Where else could you get a complete frame with all suspension, plus the awesome 505 horsepower of a true Viper V-10 Engine. This could also be a perfect transplant to upgrade your current Dodge Ram Truck. The lucky buyer could also use this as a drag strip vehicle!
ONLY 15,000 ACTUAL MILES ON THIS SETUP!!!
Up for sale today is a 2005 Ram 1500 SRT-10 Viper Rolling Chassis. This is a COMPLETE frame full rolling chassis which will include the following:
Thoroughly tested 2005 Ram 1500 Viper 8.3L 500HP 500 Cubic Inch V-10 Engine and 6-Speed manual Transmission. The 2005 SRT-10 8.3L V-10 can reach 60 mph in just 5 seconds from a standing start in ths Ram 1500 truck.
The 8.3L Viper V-10 engine delivers 90 percent of its 525 lb.-ft. of torque from 1500 to 5600 rpm. The all-new cast aluminum cylinder block has interference-fit cast-iron liners and cross-bolted main caps. Both bore and stroke have been increased over previous Viper models. Block length, block height, bore spacing, firing order, rod length and compression ratio remain the same.
Complete OEM dash with functional speedometer, radio, oil pressure gauge, and functional non-deployed air bag system
The Ram has a new Hurst shift linkage and a modified version of the Viper SRT-10's Tremec T56 six-speed manual transmission. The T56 is fully synchronized with electronic reverse lockout.
The main fuel pump with fuel tank assemblies including the charcoal canister
The aluminum heavy duty driveshaft is included as well
4.10 Dana 60 4.56 gear rear axle complete brake to brake
Standard ABS-equipped brakes are fitted with new 15-inch rotors on the front brakes. Rear brakes are modified Ram Heavy Duty 14-inch rotors.
Heavy duty painted red SRT-10 calipers
Also included are Bilstein shock absorbers, with SRT-10 heavy duty performance-tuned springs
22-inch OEM "Viper-style" wheels with 305/40/ZR22 rated Pirelli Scorpion Tires. The wheels have some scratches and lip rash, but hold air and roll freely.
The seat is the cloth seat from the Rumblebee truck as pictured. The seat was not in the vehicle when we recieved the truck. All of the driveline, suspension, dash, engine, trans, rear axle, etc are from the V-10 Viper Truck.
YOU WILL NOT FIND A UNIQUE VIPER SRT-10 TRUCK FULL FRAME CHASSIS LIKE THIS ANYWHERE!
The last SRT-10 rolling chassis we sold had problems moving to another country because it only had a bill of sale. To make this truck more accessable to be used in a custom application, or shipped overseas, we swapped out a Dodge Ram 1500 Rumble Bee Cab which has a Salvage Title. This way you can retitle it for your custom application, or ship it anywhere you want.
IF YOU ARE AN INTERNATIONAL BUYER, PLEASE CHECK THE EXPORT LAWS TO SEE IF YOU CAN GET THIS ROLLING CHASSIS INTO YOUR COUNTRY WITH OUR SALVAGE TITLE!
Price: 11,499.99 Or Best Offer
Call 866-236-5031 and ask for Tom
Feel free to shoot me a PM as well!
This is an amazing opportunity that may never come up again. The truck is a fully functional run and drive vehicle! The truck, starts, runs, stops, and is a fully functional donor for your hot rod application.The cooling is 100 percent functional, along with the complete dash and gauges! This would be a great truck for a full frame donor for your older street rod or full frame truck. Where else could you get a complete frame with all suspension, plus the awesome 505 horsepower of a true Viper V-10 Engine. This could also be a perfect transplant to upgrade your current Dodge Ram Truck. The lucky buyer could also use this as a drag strip vehicle!
ONLY 15,000 ACTUAL MILES ON THIS SETUP!!!
Up for sale today is a 2005 Ram 1500 SRT-10 Viper Rolling Chassis. This is a COMPLETE frame full rolling chassis which will include the following:
Thoroughly tested 2005 Ram 1500 Viper 8.3L 500HP 500 Cubic Inch V-10 Engine and 6-Speed manual Transmission. The 2005 SRT-10 8.3L V-10 can reach 60 mph in just 5 seconds from a standing start in ths Ram 1500 truck.
The 8.3L Viper V-10 engine delivers 90 percent of its 525 lb.-ft. of torque from 1500 to 5600 rpm. The all-new cast aluminum cylinder block has interference-fit cast-iron liners and cross-bolted main caps. Both bore and stroke have been increased over previous Viper models. Block length, block height, bore spacing, firing order, rod length and compression ratio remain the same.
Complete OEM dash with functional speedometer, radio, oil pressure gauge, and functional non-deployed air bag system
The Ram has a new Hurst shift linkage and a modified version of the Viper SRT-10's Tremec T56 six-speed manual transmission. The T56 is fully synchronized with electronic reverse lockout.
The main fuel pump with fuel tank assemblies including the charcoal canister
The aluminum heavy duty driveshaft is included as well
4.10 Dana 60 4.56 gear rear axle complete brake to brake
Standard ABS-equipped brakes are fitted with new 15-inch rotors on the front brakes. Rear brakes are modified Ram Heavy Duty 14-inch rotors.
Heavy duty painted red SRT-10 calipers
Also included are Bilstein shock absorbers, with SRT-10 heavy duty performance-tuned springs
22-inch OEM "Viper-style" wheels with 305/40/ZR22 rated Pirelli Scorpion Tires. The wheels have some scratches and lip rash, but hold air and roll freely.
The seat is the cloth seat from the Rumblebee truck as pictured. The seat was not in the vehicle when we recieved the truck. All of the driveline, suspension, dash, engine, trans, rear axle, etc are from the V-10 Viper Truck.
YOU WILL NOT FIND A UNIQUE VIPER SRT-10 TRUCK FULL FRAME CHASSIS LIKE THIS ANYWHERE!
The last SRT-10 rolling chassis we sold had problems moving to another country because it only had a bill of sale. To make this truck more accessable to be used in a custom application, or shipped overseas, we swapped out a Dodge Ram 1500 Rumble Bee Cab which has a Salvage Title. This way you can retitle it for your custom application, or ship it anywhere you want.
IF YOU ARE AN INTERNATIONAL BUYER, PLEASE CHECK THE EXPORT LAWS TO SEE IF YOU CAN GET THIS ROLLING CHASSIS INTO YOUR COUNTRY WITH OUR SALVAGE TITLE!
Price: 11,499.99 Or Best Offer
Call 866-236-5031 and ask for Tom
Feel free to shoot me a PM as well!
11-26-2008, 08:34 AM
#3
Closed ex-Sponsor Account
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Columbia Station, OH
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I am a Sponsor, Waiting on the status "update", We have paid in full and are registered sponsors with IB Adrian and Internet Brands, It will take a few days for the "sponsor" update the mods are busy. Thank you.
