1968 Camaro Tube Chassis Roller.
12-07-2008, 06:09 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
1968 Camaro Tube Chassis Roller. This is a tube chassis '68 Camaro. No title, NO VIN NUMBER
4" Chopped top
1 piece slide in fiberglass front clip (minus hood)
Needs drivers door
bondo cracked on passenger side from the "chop"
Fiberglass trunk lid
Dana 60 rear
4.56 gears
spool
Mark Williams Axles
32 x 16 x 15 Slicks (need to be replaced)
Art Morrison adjustable ladder bar suspension out back
Moroso Adjustable Wheelie Bar
Prostar wheels all the way around
Goodyear Eagle FrontRunners up front
Art Morrison rack and pinion steering rack
Coil overs in the front
Coan TH400
Reverse valve body
T-Brake
TCI SFI scatter shield
mid plate
Front motor plate for BBC
dual Holley blue fuel pumps
alluminum fuel cell mounted under hood
Autogage tack with light
reverse valve body shifter
drag racing wiring panel with wires ran, mounted on the roll cage
The cage needs padding
NHRA spec is expired, was certed to 7.50s
Interior is 95% complete. Only need a couple of pieces of aluminum behind the seat
Asking 10k OBO trades more then welcome. Will minus $1500 minus the COAN trans.
Pics can be found at: http://s472.photobucket.com/albums/rr90/Pur_Evil/
Car is located in Tooele Utah, if you would like to come and take a look at it.
If you have a trade in mind, PM me with details and pictures. I am open to anything. I don't have to sell this car, but I am not going to race it. So whatever you have of equal value, lets make a deal!
801-949-1881
KC
4" Chopped top
1 piece slide in fiberglass front clip (minus hood)
Needs drivers door
bondo cracked on passenger side from the "chop"
Fiberglass trunk lid
Dana 60 rear
4.56 gears
spool
Mark Williams Axles
32 x 16 x 15 Slicks (need to be replaced)
Art Morrison adjustable ladder bar suspension out back
Moroso Adjustable Wheelie Bar
Prostar wheels all the way around
Goodyear Eagle FrontRunners up front
Art Morrison rack and pinion steering rack
Coil overs in the front
Coan TH400
Reverse valve body
T-Brake
TCI SFI scatter shield
mid plate
Front motor plate for BBC
dual Holley blue fuel pumps
alluminum fuel cell mounted under hood
Autogage tack with light
reverse valve body shifter
drag racing wiring panel with wires ran, mounted on the roll cage
The cage needs padding
NHRA spec is expired, was certed to 7.50s
Interior is 95% complete. Only need a couple of pieces of aluminum behind the seat
Asking 10k OBO trades more then welcome. Will minus $1500 minus the COAN trans.
Pics can be found at: http://s472.photobucket.com/albums/rr90/Pur_Evil/
Car is located in Tooele Utah, if you would like to come and take a look at it.
If you have a trade in mind, PM me with details and pictures. I am open to anything. I don't have to sell this car, but I am not going to race it. So whatever you have of equal value, lets make a deal!
801-949-1881
KC
