2003 Dodge Viper Donor Car, Rebuildable, Run and Drive 505HP
02-16-2009, 03:55 PM
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Columbia Station, OH
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2003 Dodge Viper Donor Car, Rebuildable, Run and Drive 505HP This is an amazing opportunity that can benefit customer builders and shops everywhere! This Viper is a fully functional run and drive vehicle! The Viper starts, runs, stops, and is a fully functional donor for your hot rod application. The cooling is 100 percent functional, as well as dash components and gauges! This would be a great car for a full donor application or race car. No other vehicle like the Dodge Viper features Dynamic Suspension, untouchable power along with todays most up to date performance technology. This is also the perfect opportunity to freshen up a worn out viper, fix a rebuildable, or turn into a race car!
ONLY 55,646 ACTUAL MILES ON THIS SETUP!!!
Up for auction is a 2003 Dodge Viper SRT-10 Rolling Chassis. This is a COMPLETE rolling chassis which will include the following:
Thoroughly tested 2003 Viper 8.3L 505HP 500 Cubic Inch V-10 Engine and 6-Speed manual transmission. The 2003 SRT-10 8.3L V-10 can reach 60 mph in just 3.94 seconds from a stop.
ONLY 55,646 ACTUAL MILES ON THIS SETUP
The 8.3L Viper V-10 engine delivers 90 percent of its 525 lb.-ft. of torque from 1500 to 5600 rpm. The all-new cast aluminum cylinder block has interference-fit cast-iron liners and cross-bolted main caps. Both bore and stroke have been increased over previous Viper models.
Complete OEM dash with functional 220 M.P.H. speedometer cluster and 6-Disc radio, the airbags however are blown on this vehicle.
The Viper has a Hurst shifter linkage and the highly sought after Tremec T56 six-speed manual transmission. The T56 is fully synchronized with electronic reverse lockout.
The main fuel pump with fuel tank assemblies including the charcoal canister
The complete performance rear suspension bolted to the unique magnesium rear structure is included and intact.
Highly sought after 3:07 rear carrier ratio and aluminum driveshaft.
Standard ABS-equipped brakes are fitted with 14 Inch vented rotors all around.
Viper Performance Brembo red brake calipers.
The suspension includes a Dynamic Suspension coil over setup along with anti roll bars and gas charged shocks.
The front polished aluminum 18” wheels are wrapped with one 275-32-18 Michelin Pilot Sport and one Riken Raptor 275-35-18 tires.
The rear polished aluminum 19” wheels are wrapped with Matching Michelin Pilot Sport Zero Pressure tires with a size of 345-30-19.
The seats are true suede and leather ebony Viper embroidered racing style seats.
This Viper was involved in a light front end collision prior to being stripped down to a run and drive donor, the front frame rails have light damage, and the airbags are blown. This vehicle runs and lot drives, while holding functional cooling for the engine. The wheels and tires all hold air and roll freely however come as pictured.
The Vin To this Viper is: 1B3JR65Z93V500123
This Viper is branded with a Certificate of Destruction, Scrap Title. Check all of your area's laws and regulations before purchasing this vehicle. If you are purchasing this vehicle and are an international buyer, check your countries laws and regulations as far as exporting it.
These are some rough measurements to help out with any questionable sizing you may be wondering about:
Center of wheels front to back- 99 ¼ “
Rear wheels outside to outside- 73”
Center tread to center tread of rear tires- 59”
Rear frame horns outside to outside- 46 ¼”
Overall Length Frame horn to frame horn front to rear- 156”
Front frame horns outside to outside- 40 ½”
Length of engine accessories to transmission- 34”
Width of engine outside of manifold to outside of manifold- 26”
Dash width side to side- 55”
Price: 14999.99 Obo
Call me at 866-236-5031 -Tom
Or shoot me a PM.
ONLY 55,646 ACTUAL MILES ON THIS SETUP!!!
Up for auction is a 2003 Dodge Viper SRT-10 Rolling Chassis. This is a COMPLETE rolling chassis which will include the following:
Thoroughly tested 2003 Viper 8.3L 505HP 500 Cubic Inch V-10 Engine and 6-Speed manual transmission. The 2003 SRT-10 8.3L V-10 can reach 60 mph in just 3.94 seconds from a stop.
ONLY 55,646 ACTUAL MILES ON THIS SETUP
The 8.3L Viper V-10 engine delivers 90 percent of its 525 lb.-ft. of torque from 1500 to 5600 rpm. The all-new cast aluminum cylinder block has interference-fit cast-iron liners and cross-bolted main caps. Both bore and stroke have been increased over previous Viper models.
Complete OEM dash with functional 220 M.P.H. speedometer cluster and 6-Disc radio, the airbags however are blown on this vehicle.
The Viper has a Hurst shifter linkage and the highly sought after Tremec T56 six-speed manual transmission. The T56 is fully synchronized with electronic reverse lockout.
The main fuel pump with fuel tank assemblies including the charcoal canister
The complete performance rear suspension bolted to the unique magnesium rear structure is included and intact.
Highly sought after 3:07 rear carrier ratio and aluminum driveshaft.
Standard ABS-equipped brakes are fitted with 14 Inch vented rotors all around.
Viper Performance Brembo red brake calipers.
The suspension includes a Dynamic Suspension coil over setup along with anti roll bars and gas charged shocks.
The front polished aluminum 18” wheels are wrapped with one 275-32-18 Michelin Pilot Sport and one Riken Raptor 275-35-18 tires.
The rear polished aluminum 19” wheels are wrapped with Matching Michelin Pilot Sport Zero Pressure tires with a size of 345-30-19.
The seats are true suede and leather ebony Viper embroidered racing style seats.
This Viper was involved in a light front end collision prior to being stripped down to a run and drive donor, the front frame rails have light damage, and the airbags are blown. This vehicle runs and lot drives, while holding functional cooling for the engine. The wheels and tires all hold air and roll freely however come as pictured.
The Vin To this Viper is: 1B3JR65Z93V500123
This Viper is branded with a Certificate of Destruction, Scrap Title. Check all of your area's laws and regulations before purchasing this vehicle. If you are purchasing this vehicle and are an international buyer, check your countries laws and regulations as far as exporting it.
These are some rough measurements to help out with any questionable sizing you may be wondering about:
Center of wheels front to back- 99 ¼ “
Rear wheels outside to outside- 73”
Center tread to center tread of rear tires- 59”
Rear frame horns outside to outside- 46 ¼”
Overall Length Frame horn to frame horn front to rear- 156”
Front frame horns outside to outside- 40 ½”
Length of engine accessories to transmission- 34”
Width of engine outside of manifold to outside of manifold- 26”
Dash width side to side- 55”
Price: 14999.99 Obo
Call me at 866-236-5031 -Tom
Or shoot me a PM.
02-16-2009, 04:55 PM
#3
TECH Apprentice
iTrader: (2)
Join Date: Nov 2007
Location: Delaware, OH
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
That's what I was thinking. Add a roll cage, weld in some supports, add the neccessary glass and you'd have an awesome drag, drift, or autocross vehicle. Good luck with the sale.
