67 Pontiac Firebird Roller and a 454
07-31-2009, 10:00 AM
#1
Registered User
Thread Starter
Join Date: Jul 2009
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
67 Pontiac Firebird Roller and a 454 Out of time and Money my loss your gain
Clear title
Body includes
New front Disc Brake kit from CPP all lines 8” duel diagram booster
New Poly Bushings on all control arms
New upper and lower Ball joints
New Body mount bushings
New oversized sway bar
New inner and outer tie rod ends.
New complete wiring harness
New weather strip kit
New window crank handles
New Carpet
8 point cage (not installed)
Floor pans have been replaced
Competition engineering leaf spring relocation kit
New Sub frame connectors (not installed)
New Big block front springs
Center console for a Manual trans
Original bucket seats (need recovering)
Back seats also
Fuel cell mounted in trunk but I have the original tank also.
Original mono leaf springs
400 Hood
original 10 bolt original
I have other parts to
The body needs a some work on the passenger side QP
$4500.00 for Roller OBO
The block is out of a 1996 silverado 454 Board over .30 with approximately 550HP and 600 TQ
It was built by Houston Engine and Balancing he also ran it and broke it in.
It has dart 345 aluminum heads and many performance parts on it complete Carb to oil pan except wires. Have receipts for almost everything. It also has a complete Serpentine system on it includes water pump alternator and power steering pump.
Turbo 400 Trans ready to be rebuilt. About $8000 invested in the engine.
Will sell for $6200.00 OBO
Or $9,500.00 takes all OBO
Houston Tx. Area
e-mail me at rance_tollett@kindermorgan.com
281-543-4244
Clear title
Body includes
New front Disc Brake kit from CPP all lines 8” duel diagram booster
New Poly Bushings on all control arms
New upper and lower Ball joints
New Body mount bushings
New oversized sway bar
New inner and outer tie rod ends.
New complete wiring harness
New weather strip kit
New window crank handles
New Carpet
8 point cage (not installed)
Floor pans have been replaced
Competition engineering leaf spring relocation kit
New Sub frame connectors (not installed)
New Big block front springs
Center console for a Manual trans
Original bucket seats (need recovering)
Back seats also
Fuel cell mounted in trunk but I have the original tank also.
Original mono leaf springs
400 Hood
original 10 bolt original
I have other parts to
The body needs a some work on the passenger side QP
$4500.00 for Roller OBO
The block is out of a 1996 silverado 454 Board over .30 with approximately 550HP and 600 TQ
It was built by Houston Engine and Balancing he also ran it and broke it in.
It has dart 345 aluminum heads and many performance parts on it complete Carb to oil pan except wires. Have receipts for almost everything. It also has a complete Serpentine system on it includes water pump alternator and power steering pump.
Turbo 400 Trans ready to be rebuilt. About $8000 invested in the engine.
Will sell for $6200.00 OBO
Or $9,500.00 takes all OBO
Houston Tx. Area
e-mail me at rance_tollett@kindermorgan.com
281-543-4244
