95 Z28 Roller Full Suspension - Wolfe Cage
#1
On The Tree
Thread Starter
95 Z28 Roller Full Suspension - Wolfe Cage
Full interior, but gutted under dash. No heat or A/C. M6 Car. Asking $2800
Mods are as follows:
BMR Race LCAs
BMR Xtreme Duty Torque Arm
BMR Panhard Bar
BMR K-Member
BMR Lower A-Arms
Madman Manual Rack
Hal QA-1 R Model Front Shocks
Wolfe Racecraft 8-Point Chromoly Cage
Stroud 5 Point Harness
Comes with LT1 Fan Assembly, Radiator and LT1 PCM with LT1 Edit.
Car has rebuild title from a sideswipe before I purchased (everything fixed).
Have stock 10-Bolt to throw under it. Ford 9" housing with 35-Spline Gun-drilled Axles, and Wolfe Anti-Roll Bar installed available separately for $1200 (no 3rd Member).
Will have stock wheel on front when it is sold.
I can be contacted at Dave1972@***.net or by PM.
Dave
Mods are as follows:
BMR Race LCAs
BMR Xtreme Duty Torque Arm
BMR Panhard Bar
BMR K-Member
BMR Lower A-Arms
Madman Manual Rack
Hal QA-1 R Model Front Shocks
Wolfe Racecraft 8-Point Chromoly Cage
Stroud 5 Point Harness
Comes with LT1 Fan Assembly, Radiator and LT1 PCM with LT1 Edit.
Car has rebuild title from a sideswipe before I purchased (everything fixed).
Have stock 10-Bolt to throw under it. Ford 9" housing with 35-Spline Gun-drilled Axles, and Wolfe Anti-Roll Bar installed available separately for $1200 (no 3rd Member).
Will have stock wheel on front when it is sold.
I can be contacted at Dave1972@***.net or by PM.
Dave
#5
On The Tree
Thread Starter
No motor. I do have a low mileage forged 392 (3.875 stroke, 4.010 bore) LT1 short-block with a small roller cam that I would be willing to sell very reasonably.
Dave
Dave
#6
TECH Fanatic
iTrader: (10)
Join Date: Apr 2006
Location: Fort Worth, Tx
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking more sbc style. thanks for the offer on the engine though.
i may be very interested in this car. let me run it by my stepdad since he's the one funding the project and if i have anymore questions i'll pm you.
i may be very interested in this car. let me run it by my stepdad since he's the one funding the project and if i have anymore questions i'll pm you.